Configuration Examples For Port-Shaper And Llq In The Presence Of Efps; Efps; Configuration Example: Class-Default Port-Shaper And Efp Policy - Cisco ASR 900 Series Configuration Manual
Aggregation services router qos: policing and shaping configuration guide, cisco ios xe release 3s
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Manual (174 pages) ,
- Configuration manual (172 pages)
Table of Contents
Advertisement
Configuration Examples for Port-Shaper and LLQ in the Presence of EFPs
Configuration Examples for Port-Shaper and LLQ in the Presence
of EFPs
Example: Configuring Hierarchical QoS Port Level Shaping on the Main
Interface with EFPs
The following example shows how to configure hierarchical QoS port level shaping on a main physical
interface to support traffic prioritization and Low Level Queueing across all EFPs configured on the interface:
policy-map parent-llq
class class-default
service-policy child-llq
policy-map child-llq
class precedenc-1
set cos 5
bandwidth percent 20
class precedenc-2
bandwidth percent 80
interface GigabitEthernet 0/0/1
no ip address
negotiation auto
service-policy output parent-llq
service instance 1 ethernet
encapsulation dot1q 100
bridge-domain 100
!
service instance 2 ethernet
encapsulation dot1q 101
bridge-domain 101
Only match EFP and match qos-group is supported on RSP3 in egress policy map.
Note
Configuration Example: Class-default Port-Shaper and EFP policy
The following example shows how to configure class-default port-shaper and EFP policy, where the main
interface can have the class-default shaper policy and EFP can have the HQOS policies.
policy-map co12
class class-default
shape average 50m
policy-map def
class class-default
shape average 500m
service-policy co12
QoS: Policing and Shaping Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series)
32
Port-Shaper and LLQ in the Presence of EFPs
Advertisement
Table of Contents
