Cable Side - Cisco IE 4010 Hardware Installation Manual
Hide thumbs
Also See for IE 4010:
- Software configuration manual (1066 pages) ,
- Product documentation (28 pages) ,
- Hardware installation manual (86 pages)
Table of Contents
Advertisement
Product Overview
Cable Side
Cable Side
Figure 1
Cisco IE-5000-16S12P Cable-Side View
1
LEDs
2
Express Setup button
3
Twelve 10/100/1000 PoE/PoE+ Ports (Downlinks)
4
Alarm port
5
USB (mini-Type B) console port
LEDs
For detailed information about LEDs see
10/100/1000 PoE/PoE+ Ports (Downlinks)
You can set the 10/100/1000 ports on the switch to operate in any combination of half duplex, full duplex, or 10 or 100
Mb/s. You can set the ports for speed and duplex autonegotiation. The default setting is autonegotiate.
When set for autonegotiation, the switch determines the speed and duplex settings of the attached device and advertises
its own capabilities. If the connected device also supports autonegotiation, the switch negotiates the best connection
(the fastest line speed that both devices support and full-duplex transmission if the attached device supports it) and
configures itself accordingly. In all cases, the attached device must be within 328 feet (100 meters).
Warning:
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections
are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection
methods, unless the exposed metal parts are located within a restricted access location and users and service
people who are authorized within the restricted access location are made aware of the hazard. A restricted access
area can be accessed only through the use of a special tool, lock and key or other means of security. Statement
1072
The 10/100/1000 PoE ports on the Cisco IE-4010 switches provide PoE support for devices that are compliant with IEEE
802.3af/802.3at. The Cisco prestandard PoE is also supported for Cisco IP Phones and Cisco Aironet Access Points. The
PoE ports on the switch deliver up to 30 W of PoE+ power. All twelve ports are PoE ports and can be assigned a port
priority.
6
7
8
9
10
LEDs, page
5.
2
Power-input terminal
Flash memory card slot
Display mode button
Twelve 100/1000 SFP Ports
Console port
Hide quick links:
Advertisement
Table of Contents
