Sfp/Sfp+ Port; Gps Interface - Cisco ASR 9000 Series Manual
Preparing for installation
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Preparing for Installation
• Amber (FAST)—UTI is operating in fast mode.
Figure 65: SYNC Port Connector
Table 9: BITS/J.211 Connector Pinout
Pin
1
2
3
4
5
6
7
8
SFP/SFP+ Port
The RSP-440 and RSP-440 Lite support two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization
cluster ports. The RSP-880 supports four 10-GE SFP+ ports that are used for external server connectivity
capability.
GPS Interface
The RSP-440, RSP-440 Lite, RSP880-LT, and RSP-880 have a Time of Day (ToD) port, 10-MHz connector,
and 1-PPS connector that allow you to configure input or output clocking with a GPS device.
Signal
DTI_P/BITS_RX_P
DTI_P/BITS_RX_N
—
BITS_TX_P*
BITS_TX_N*
—
—
—
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
RSP and RP Port Connection Guidelines
Note
Bi-direction for DTI, T1/E1/64K Input
Bi-direction for DTI, T1/E1/64K Input
—
T1/E1/6.321M Output
T1/E1/6.321M Output
—
—
—
63
Advertisement
Table of Contents
