Table of Contents
Advertisement
802. 1 x Commands
78-20269-01 Command Line Interface Reference Guide
Example
The following example sets 802.1X authentication mode to RADIUS server
authentication. If no response is received, no authentication is performed.
Console(config)#
aaa authentication dot1x default radius none
20.2
dot1x system-auth-control
Use the dot1x system-auth-control Global Configuration mode command to
enable 802.1x globally. Use the no form of this command to restore the default
configuration.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
All the ports are in FORCE_AUTHORIZED state.
Command Mode
Global Configuration mode
Example
The following example enables 802.1x globally.
Console(config)#
dot1x system-auth-control
20.3
dot1x port-control
Use the dot1x port-control Interface Configuration (Ethernet) mode command to
enable manual control of the port authorization state. Use the no form of this
command to restore the default configuration.
Syntax
{auto | force-authorized | force-unauthorized}[time-range
dot1x port-control
time-range-name]
20
250
Advertisement
Table of Contents
