Assigning A Tftp Sever - Cisco 7902G Administration Manual
Cisco unified callmanager 5.0
Hide thumbs
Also See for 7902G:
- Quick start manual (29 pages) ,
- Phone manual (28 pages) ,
- Administration manual (184 pages)
Table of Contents
Advertisement
Configuring TFTP Options
Assigning a TFTP Sever
Using the Phone Configuration Web Page (Cisco Unified IP Phone 7902G, 7905G, and 7912G)
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
4-32
If you are not using DHCP in your network, and you want to change this setting,
you must manually assign the TFTP server to the phone.
Before you can manually assign a TFTP server, you must enable an alternate
TFTP server. For instructions, see the
section on page
4-33.
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the TFTP servers:
To set TFTP Server1, in the TFTPServer1 field enter an address and click
a.
Apply.
To set TFTP Server2, in the TFTPServer2 field enter an address and click
b.
Apply.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Enabling an Alternate TFTP Server"
"Accessing Network Settings through a Phone
4-3.
OL-8151-01
Advertisement
Table of Contents
Troubleshooting
