Port - Siemens SCALANCE XB-200 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XB-200:
- Operating instructions manual (62 pages) ,
- Web based management (190 pages) ,
- Configuration manual (618 pages)
Table of Contents
Advertisement
Configuring with Web Based Management
5.5 The "Layer 2" menu
5.5.5.2
Port
Mirroring ports
You can only configure the settings on this page if you have already generated a session ID
with the session type "Port-based" on the "General" tab.
Description of the displayed boxes
The page contains the following boxes:
● Session ID
Shows the session.
● Port
Shows all available ports. The port is made up of the module number and the port
number, for example port 0.1 is module 0, port 1.
● Ingress Mirroring
Enable or disable listening in on incoming packets at the required port.
● Egress Mirroring
Enable or disable listening in on outgoing packets at the required port.
Note
Mirroring with ring ports
If you enable the mirroring function for a ring port, the ring port sends test frames even in the
"link down" status.
Steps in configuration
1. In the table, click the check box of the row after the port to be mirrored.
Select whether you want to monitor incoming or outgoing packets.
To monitor the entire data traffic of the port, select both check boxes.
2. Click the "Set Values" button.
190
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
- Quick Links:
- Assignment of an Ip Address
Hide quick links:
Advertisement
Table of Contents
