Ink Supply Mechanism; Csic; Valve Mechanism - Epson Stylus Pro 4400 Service Manual
Hide thumbs
Also See for Stylus Pro 4400:
- Reference manual (396 pages) ,
- Specifications (12 pages) ,
- Setup manual (15 pages)
Table of Contents
Advertisement
EPSON Stylus Pro 4400/4450/4800/4880/4880C
2.2.2 Ink Supply Mechanism
This printer has ink cartridges for 8 colors held by Ink holders (I/H) located on
the left and right sides of the printer. There are protruding tabs and markings
on the top of each color ink cartridge to prevent mistaken installation.
NOTE: The 4-color model is equipped with the Ink Holder (I/H) on the left
side only.
Explanation of valve mechanism mounted on the cartridge
The valve automatically opens and closes when the ink cartridge is
installed and removed.
Ink cartridge
Figure 2-2. Valve Mechanism
Operating Principles
Ink cartridge holder
(Opening/closing)
To Print Head
Printer Mechanism Components
The ink flow is as shown below.
Each color's ink cartridge → Each color's I/H (Ink Holder) →
Each color's ink tube → Each color's head dumper (Carriage) → Print Head
NOTE: Below is a drawing of Stylus Pro 4800/4880/4880C. Stylus Pro
4400/4450 has no ink holder on the left.
Ink tube
Ink Holder
Ink Cartridge
Figure 2-3. Ink Supply Mechanism
CSIC
Memory chip information for each color ink cartridge passes through the
CSIC relay circuit board on each Ink holder and is stored in the EEPROM
on the BOARD ASSY., MAIN.
Various information such as installed ink color and remaining quantity is
stored in the EEPROM. (Refer to "Ink Information Menu" (p.88).)
Revision C
Ink Holder (x4)
118
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
