Function To Prevent Irregular Printing; Strong Cancel Data; Skip Reading Of Irregular Data - Epson Stylus Pro 4400 Service Manual

Hide thumbs Also See for Stylus Pro 4400:

Table of Contents

EPSON Stylus Pro 4400/4450/4800/4880/4880C

1.4.8 Function to Prevent Irregular Printing

When 16KB DC1 is sent to the head of each job, the printer performs a

special initialization operation.

"1.4.9 Initialization (p.104)"

Unprintable characters

It doesn't print characters including ASCII code with text print mode.

Table 1-47. Unprintable hexadecimal code (Control character code)

NOTE: 0Ah, 0Ch, 0Dh, 11h, and 1Bh are ESCP command supported by

the printer. The printer judges the command at the same time and

decides whether to print it.

Product Description

for this initialization operation.

Operating Panel

Job time out

Refer to "1.4.4.11 Job Time-out Setting (p.54)".

Preventing the remaining data from being printed on the second cut

If the print data size is larger than the maximum data size that can be

printed on a single sheet (manual feed/ ASF), the remaining data that

cannot be printed on the first sheet is not printed on the second sheet.

The remaining print data (graphic data) is ignored, and the next new

print data is printed from the top of the second paper.

Show Quick Links

Table of Contents