Table of Contents
Advertisement
Performance Series IP Camera Software Configuration Guide
Cannot upgrade firmware through the
network
Cannot install/log in to web client.
Water leaking into camera housing.
Power supply is unstable.
64
•
If you cannot upgrade firmware over the network,
try using port 3800.
•
Ensure that your browser's security settings allow
ActiveX controls.
•
Ensure that DirectX 8.1 or higher is installed on
your PC.
•
Ensure that you have a valid network setup and
that you are using the correct login user name
and password.
•
Ensure that the front glass cap and rear
waterproof cap are tightly secured. Loosening or
removing the front and rear caps will allow water
to enter the housing.
•
The operating temperature range for the supplied
power adapter is approximately 32°F to 104°F
(0°C to 40°C). Replace with an industry-level
power adapter if operating the camera in
temperatures below 32°F (0°C).
•
Use of a UPS power supply is strongly
recommended.
Hide quick links:
Advertisement
Table of Contents
