Table of Contents
Advertisement
Configuring Network Settings
TCP/IP
Figure 5-9 TCP/IP Interface
Table 5-7 TCP/IP Configuration
Parameter
Host Name
Ethernet Card
Mode
MAC Address
IP Version
IP Address
Preferred DNS Server
Function
Configure to set the current host camera's name. Maximum 32
characters.
Select an Ethernet port. The default is wire LAN.
Note
If you modify these settings, you will have to reboot your camera
to activate the new setup.
Select Static or DHCP mode.
The IP Address, Subnet mask, and Default Gateway fields are
unavailable when you select DHCP mode to automatically search for
the IP address.
If Static mode is selected, you must manually assign the IP Address,
Subnet mask, and Default Gateway.
If DHCP mode is selected, the IP Address, Subnet mask, and Default
Gateway are assigned automatically.
Note
IP Address, Subnet mask, Default Gateway, and DHCP are read-
only when PPPoE is enabled.
Displays the MAC address.
Select the IP version you are using: IPv4 or IPv6.
If Static mode is selected, type values for the IP Address, Subnet mask,
and Default Gateway.
Enter the preferred DNS server IP address.
Configuring Camera Settings
31
Hide quick links:
Advertisement
Table of Contents
