Chapter - Cisco ASR 1001-HX Hardware Installation Manual
Hide thumbs
Also See for ASR 1001-HX:
- Common criteria operational user guidance and preparative procedures (72 pages) ,
- Removing and replacing (30 pages)
Table of Contents
Advertisement
Hardware Features
• Software redundancy using Dual IOS, similar to all the other non-hardware redundant routers from the
Cisco ASR 1000 Series Aggregation Services Router family.
• LED indicators for Ethernet and console status, as well as visual system state indications.
• Command-line interface (CLI), alarm, network management, logging, statistics aggregation, and on-board
failure logging (OBFL).
• Environmental chassis management.
• 80 Mb ternary content-addressable memory (TCAM).
• Field-replaceable units (FRU).
See Chapter 2,
• Field-replaceable Crypto Processor.
The Cisco ASR 1002-HX Router supports:
• Up to 32 GB (16 GB in the base configuration) of DDR3 error-correcting code-protected field-replaceable
memory, with single-bit error correction and multi-bit error detection.
• A fixed forwarding processor with up to 100 Gbps sustained forwarding data traffic through the chassis.
• Up to 25 Gbps security and crypto processing through a dedicated security processor.
• RJ-45 console ports and auxiliary ports, and a mini USB console port.
• 32 GB internal bootflash storage.
• One copper Ethernet 10/100/1000 Mbps network management port.
• An embedded USB (eUSB) flash module that supports 32 GB of nonvolatile Flash storage.
• Two USB 2.0 ports for USB flash sticks.
• Eight built-in 1 GE SFP-only interfaces, and eight built-in 10 GE SFP+ interfaces that support SyncE.
• One Ethernet Port Adapter (EPA) bay.
• Stratum 3E network clocking per GR-1244-CORE, using 1 GE, 10 GE, or EPA interfaces as timing
sources.
• Software redundancy using Dual IOS, similar to all the other non-hardware redundant routers from the
Cisco ASR 1000 Series Aggregation Services Router family.
• LED indicators for Ethernet and console status, as well as visual system state indications.
• Command-line interface (CLI), alarm, network management, logging, statistics aggregation, and on-board
failure logging (OBFL).
• Environmental chassis management.
• 80 Mb ternary content-addressable memory (TCAM).
• Field-replaceable units (FRU) with online insertion and removal (OIR).
See Chapter 2,
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
2
Supported Hardware Components
Supported Hardware Components
for information on supported FRUs.
for information on supported FRUs.
Overview
- Quick Links:
- Installation Guide
- Hardware Features
- Front View
Hide quick links:
Advertisement
Table of Contents
