Checking The Leds On The Ssc; Ssc Run/Fail Led States - Cisco ASR 5500 Administration Manual

Asr 5500 system administration guide, staros release 19

Hide thumbs Also See for ASR 5500:

Table of Contents

Troubleshooting

Checking the LEDs on the SSC

Each SSC is equipped with the following LEDs as shown in the accompanying figure:

• Redundancy

• System Status

• System Service

Figure 16: SSC Status LEDs

The possible states for all SSC LEDs are described in the sections that follow.

The SSC Run/Fail LED indicates the overall status of the card. This LED should be green for normal operation.

The possible states for this LED are described in the following table. If the LED is not green, use the

troubleshooting information in the table to diagnose the problem.

ASR 5500 System Administration Guide, StarOS Release 19

Checking the LEDs on the SSC