hit counter script

Communications - Panasonic UF-5500 Service Manual

Hide thumbs Also See for UF-5500:
Table of Contents

Advertisement

UF-5500 / 4500

11.2.7. Communications

This section explains general troubleshooting procedures for the 400 series of Information Codes. These
errors are primarily caused by poor telephone line quality (loss, noise, echo, etc.). This unit is furnished with
Service Mode 1 to assist in troubleshooting line quality problems.
It is suggested that both the transmitting unit and receiving unit be adjusted. This section gives relevant
parameters in Service Mode 1 for the transmitting and receiving sides. If no improvement is realized after
the parameters are adjusted, it is recommended that the parameters be returned to the default settings.
11.2.7.1. Communication Trouble
START
Is this an international
communication?
No
To equalize loss (Amplitude Distortion) between the fax unit,
and the phone company exchange.
Transmitting Side
#014 : 0 dBm
4, 8, 12 dBm
To improve a poor S/N (signal-to-noise ratio).
Transmitting Side
#010 : -9 dBm
0 to -15 dBm
#017 : 14400 bps
12000 to 2400 bps
#033 : 33600 bps
31200 to 2400 bps
To cope with impulse noise.
Receiving Side
#070 : 128 256 to 2048
To cope with shifted signal sequences caused by an echo.
Transmitting Side
#025 : 1st 2nd
Perform a communication test after changing settings.
Yes
Transmitting Side
#021 : Off
On
#025 : 1st
2nd
Receiving Side
#013 : 0 dBm
4, 8, 12 dBm
Receiving Side
#011 : -43 dBm
#018 : 14400 bps
#019 : On
#023 : Normal
#033 : 33600 bps
Receiving Side
1080 Hz
#024 : 2100 Hz
#030 : 75 ms 1 sec
#018 : 14400 bps
#024 : 2100 Hz
#030 : 75 ms
#033 : 33600 bps
-33 dBm or -38 dBm
12000 to 2400 bps
Off
Long
31200 to 2400 bps
154
Receiving Side
12000 to 2400 bps
1080 Hz
1 sec
31200 to 2400 bps/
TC9600/TC7200

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-4500

Table of Contents