Show Etherchannel - Cisco Catalyst 2950 Command Reference Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Software configuration manual (674 pages) ,
- Command reference manual (408 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
Syntax Description
channel-group-number
detail
load-balance
port
port-channel
summary
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(6)EA2
12.1(14)EA1
Usage Guidelines
If you do not specify a channel-group, all channel groups appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show etherchannel 1 detail command:
Switch> show etherchannel 1 detail
Group state = L2
Ports: 1
Port-channels: 1 Max Port-channels = 1
Port: Fa0/3
------------
Port state
Channel group = 1
Port-channel
Port index
0L-10102-01
show etherchannel [channel-group-number] {detail | load-balance | port | port-channel |
summary} [ | {begin | exclude | include} expression]
(Optional) Number of the channel group. The range is 1 to 6.
Display detailed EtherChannel information.
Display the load-balance or frame-distribution scheme among ports in the
port channel.
Display EtherChannel port information.
Display port-channel information.
Display a one-line summary per channel-group.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced. It replaced the show port group command.
The brief keyword was removed.
Maxports = 8
Ports in the group:
-------------------
= Down Not-in-Bndl
= null
= 0
Mode = Automatic-Sl
GC
= 0x00000000
Pseudo port-channel = Po1
Load = 0x00
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show etherchannel
Gcchange = 0
2-329
Advertisement
Table of Contents
