Cisco Nexus 9508 Hardware Installation Manual page 79

Hide thumbs Also See for Nexus 9508:

Table of Contents

Replacing or Installing Modules, Fan Trays, and Power Supplies

a) Use both of your hands to hold the two handles on the front of the fan tray that you are installing.

Figure 15: Installing a Fan Tray in the Chassis

Hold the two fan tray handles with your two hands.

Position the back of the fan tray to the open fan tray

slot. The pins on the top and bottom of the fan tray

should align to holes in the chassis and the two sets

of rails on the top of the fan tray should align to

two sets of tracks on the top of the open slot. Slide

the fan tray all the way into the slot.

OL-30837-01

Screw in four captive screws and tighten each screw

to 8 in-lb (0.9 N·m) of torque.

Cisco Nexus 9508 Switch Site Preparation and Hardware Installation Guide

Replacing a Fan Tray

Table of Contents

Show Quick Links

Table of Contents