Cisco Nexus 9508 Hardware Installation Manual page 22

Hide thumbs Also See for Nexus 9508:

Table of Contents

Clearance Requirements

Air intake from the cold aisle for all modules

and power supplies

Air exhaust to the hot aisle for all modules and

power supplies

No left side clearance required (no airflow on

left side)

Chassis width

No right side clearance required (no airflow on

right side)

Cisco Nexus 9508 Switch Site Preparation and Hardware Installation Guide

Clearance required between the front of the

chassis and the inside of the cabinet (if used) or

the edge of the cold aisle (if no cabinet) for cable

management and ejector handles on I/O modules

Front service clearance required for installing

the chassis and replacing the modules on the front

of the chassis

Width of the chassis plus vertical mounting

brackets on each side

Side clearance required by the front of the chassis

for rotation of I/O module handles (keep this area

clear of rack, cable management, and other

components that can prevent full rotation of the

ejector levers)

Preparing the Site

OL-30837-01

Table of Contents

Show Quick Links

Table of Contents