Configuring Policy For Ingress Qos; Carrier Ethernet Configuration Guide (Cisco Asr 920 Series - Cisco ASR 920 Series Configuration Manual Ethernet Router
Hide thumbs
Also See for ASR 920 Series:
- Installing manual (74 pages) ,
- Configuration manual (68 pages) ,
- Configuration (52 pages)
Table of Contents
Advertisement
Configuring policy for ingress QoS
Command or Action
Step 7
bridge-domain domain-number
Step 8
end
Configuring policy for ingress QoS
SUMMARY STEPS
1. enable
2. configure terminal
3. class-map match-all cos value
4. match cos value
5. policy-map policy-name
6. class class-name
7. set cos cos value
8. police cir value
9. interface interface-number
10. no ip address
11. load-interval seconds
12. service instance id ethernet evc-id
13. encapsulation dot1q vlan-id second-dot1q vlan-id
14. rewrite ingress tag translate 2-to-1 dot1q vlan-id symmetric
15. service-policy input policy-map-name
16. bridge-domain domain-number
17. end
DETAILED STEPS
Command or Action
Step 1
enable
Step 2
configure terminal
Step 3
class-map match-all cos value
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
76
Purpose
Binds a service instance to a bridge domain instance.
Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Determine how packets are evaluated when the packets meet all of the
match criteria.
VLAN Translation with QoS
- Quick Links:
- Bridge Domains
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
