Configuring Mac Address Limiting On A Bridge Domain - Cisco ASR 920 Series Configuration Manual Ethernet Router
Hide thumbs
Also See for ASR 920 Series:
- Installing manual (74 pages) ,
- Configuration manual (68 pages) ,
- Configuration (52 pages)
Table of Contents
Advertisement
Configuring MAC Address Limiting on a Bridge Domain
Command or Action
Step 12
mac security
Example:
Device(config-if-srv)# mac security
Step 13
end
Example:
Device(config-if-srv)# end
Configuring MAC Address Limiting on a Bridge Domain
Perform this task to configure an upper limit for the number of secured MAC addresses that reside in a bridge
domain.
SUMMARY STEPS
1. enable
2. configure terminal
3. bridge-domain bridge-id
4. mac limit maximum addresses maximum-addresses
5. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
98
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Purpose
Enables MAC security on the service instance.
Returns to user EXEC mode.
Purpose
Enables privileged EXEC mode.
Enters global configuration mode.
• Enter your password if prompted.
- Quick Links:
- Bridge Domains
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
