, a l w a y s c o n s u l t t h e c u r r e n t P I O N E E R Service Manual. A subscription to, or additional copies Also test with plug reversed of, PIONEER Service Manual may be obtained at a (Using AC adapter Earth nominal charge from PIONEER.
Page 3
By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. L 13942296513 u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Channel Separation ..........60dB min. L 13942296513 DATA COMMUNICATION Serial Interface ............RS-232C Modem(for TS7) ..............V23 Modem(Except TS7) ........V22 bis + V42 IC Card ..............ISO-7816 GENERAL Power Requirement ........AC230V/50Hz Power Consumption ..........18W typ. Dimensions ....... 380 (W) X 253 (D) X 71 (H) Net Weight ..............
(In the case of no amount instructions, apply as you think it appropriate.) 2.1 PACKING 9(Except BCT-1730) 10(BCT-1730 only) 14(for BCT-1710) 14(for BCT-1730) 13(for TS7) 13(for BCT-1710 and BCT-1730) L 13942296513 13 (BCT-1720 only) u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 7
BDG1035 Modem Cable (10m:White) See Contrast Table(2) Modem Adapter See Contrast Table(2) Catalogue Bag BHG1047 (2) CONTRAST TABLE TS7/NYXK/FR, BCT-1710/NYXK/SP, BCT-1720/NYXK/IT and BCT-1730/NYWXK/PL are constructed the same except for the following: Part No. Mark Remarks Symbol and Description BCT-1710 BCT-1720...
Page 9
Screw Cover BMR1158 Serial No. Label See Contrast Table (2) FLASH Memory IC (IC3001) See Contrast Table (2) (2) CONTRAST TABLE TS7/NYXK/FR, BCT-1710/NYXK/SP, BCT-1720/NYXK/IT and BCT-1730/NYWXK/PL are constructed the same except for the following: Part No. Mark Remarks Symbol and Description...
Page 13
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST" 3 7 63 1515 0 CN6102 BKP1137- BKM1085- MODEM ASSY (BWX1215) POWER ASSY (BXF1166) L 13942296513 FRONT ASSY (BWX1216) u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
3.3 MAIN ASSY(1/8) 3 7 63 1515 0 MAIN ASSY (1/8) DBS Front End CHDEC BLOCK (TS7 : BWE1129) (BCT-1710 : BWE1130) (BCT-1720 : BWE1131) (BCT-1730 : BWE1143) L 13942296513 LNB Power u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 15
3 7 63 1515 0 QPSK Link IC L 13942296513 u163 : The power supply is shown with the marked box. TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 27
3 7 63 1515 0 Sub CPU CN7002 CN8001 L 13942296513 Reset IC u163 : The power supply is shown with the marked box. TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Fuse 1102 (REK1102) : Only this part is supplied as a service part. 7265 NOTE FOR FUSE REPLACEMENT KA431LZ CAUTION FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE AND RATINGS ONLY. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams. Capacitor Connector SIDE A L 13942296513 SIDE B P.C.Board Chip Part CN7002 CN8001 u163 (BNP1369-B) TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
This IC is not a assy service part but a set service part. Part No. Symbol and Description Remarks Mark BCT-1710 BCT-1720 BCT-1730 /NYXK/IT /NYWXK/PL /NYXK/FR /NYXK/SP IC3001 (16M FLASH) BGC1079-A-RD BGC1080-A-RD BGC-1081-A-RD BGC1082-A-RD u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
4P Modular Jack BKP1137 CN6101 7P Socket BKP1178 POWER ASSY This ASSY has no service part as a assy part. Only the fuse(1102:REK1102) is the service part as a set part. Refer to page 9. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
How to Exit from the Check Mode : By disconnecting short cable from K7003, turn on the power again. MAIN ASSY SIDE A Rear Side CN4002 CN5004 SCART Connector RS232C Connector L 13942296513 Test Pin Point K7003 IC2001 IC7003 OMEGA CN7002 CN7003 Front Side Fig.1 Test Pin Loaction u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 47
Execution program : GGS1028.exe When the GGS1028.exe is started, the following initial screen is displayed. L 13942296513 Select the suitable destination with the cursor, and press the Return key. The following screen will be displayed. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 48
3 7 63 1515 0 Select MAKE CHECK_STEP with the cursor, and press the Return key. The following screen will be displayed. When the message: “step_file.dat exist!!!” is displayed, press “y” to overwrite the file. L 13942296513 u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 49
Checks the tuner AGC voltage and the external SLOW_SW input voltage. OK: Both Check Input Voltage checks are OK, NG: Both checks are NG. * for the Slow SW input voltage check, 6V or 12V has to be applied from outside. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 50
Pressing the RETURN key at this screen will transmit the selected command to the IRD. u163 If the IRD operates normally for the transmitted command, “OK” will be displayed. If a problem exists, NG will be displayed. TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 51
After completion of all settings, the data can be transmitted to the IRD with the “F9” key. L 13942296513 Set the state of IRD (F5) Example After completion of all settings, the data can be transmitted to the IRD with the “F9” key. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 52
5. Select IRD CHECK from the main menu, and press the RETURN key. 6. Press the RETURN key to send the unlock command to the IRD. 7. Disconnect the power cable and re-connect it, the IRD will return to the normal application mode. TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
* Whether there are poor contacts of the wire(s). 2) Generally, the IRD may have ; * Soldering defections made by the mechanical stresses. * Devices failures which show an evident change of their colour. L 13942296513 u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 54
(to page 56) [Add solder to Resistor-Arrays around IC3002] ↓ [Add solder to IC3002] : SDRAM ↓ u163 [Replace IC3002] : SDRAM ↓ [Replace IC3001] : FLASH ROM ↓ (b) (to next page) [Replace MAIN ASSY] TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 55
[Replace POWER SUPPLY ASSY.] <Examine +24V/+19V at CN0203 Pin 16 : 24V?> [Replace POWER SUPPLY ASSY.] (When P0W1= High) [POWER SUPPLY ASSY seems OK] ↓ [Go back to MAIN ASSY check] ↓ ((AA))(to page 54) u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 57
<Execute "No.7 : Tuner Check" operation.> ((D))(to page 58) [The channel decoder is faulty.] <Picture check> [The Analog Video is faulty.] ((E))(to page 60) ((F))(to page 61) <Sound check> [The Analog Audio is faulty.] [End] u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 58
((D2)) (from page 59) ↓ L 13942296513 <Execute "No.5 : Tuner Check" operation.> [Replace M1001(Front-End) or IC1004 (Link IC).] [Examine around the IC2001(OMEGA).] M1001 Pin List Name LNB POWER (RF Input) AGC Input +28V u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 59
↓ at IC1004 Pin 16?> [Execute any "Set parameter" operation.] (In the "main.exe" Window, push f1 key then f9 key.) [Replace Q1003] ↓ [Execute "No.5 : Tuner Check" operation.] ↓ ((D2)) (to page 58) u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 60
[Replace MAIN ASSY.] <Are they OK?> [Examine IC4001(CXA2161R: A/V Switch) RGB output] (IC4001: Pin45: R, IC4001: Pin46: G, IC4001: Pin47: B) [Replace IC4001.] <How is the result?> ↓ OK [Around Analog video portion is faulty.] u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 61
TV-SCART & CINCI → TV-SCART → VCR-SCART → CINCI → Others ↓ <How is the result?> [Replace IC4001.] [Examine around the Muting transistors] <Q4015 corrector : –3.3V?> (Q4001/Q4002/Q4009/Q4010/Q4015) (POWER_MUTE) [Add solder to the CN4002.] u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 62
(This is for 7 generation) External Modem Computer Normal Modem Check Start It takes about 38 to 40 seconds Initialize IRD modem AT1?Q50 ATS0 ATE0 Initialize ex-modem AT + MS = 3.0 ∗1 L 13942296513 u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 63
CAnal + Check “Data Transmission” “CAnal +” is received “CAnal +” is tran- from IRD smitted from IRD PIONeer Check “Data Receving” “PIONeer” is transmitted from external modem “PIONeer” is received from external modem u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 64
* 2 : Computer continues sending “RX?” to IRD for 10 seconds until result code come back to computer. result code : This is the code that return from IRD fs modem. L 13942296513 Ex) “NO DIALTONE”, “CONNECT ”, “NO CARRIER”, etc. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 66
DiSEqC modulation, 22 kHz Tone, Programmable F22/DiSEqC Output Port Programmable Digital to Analog Converter Output Note: The following abbreviations are used: I - Input; O - Output; OD - Open drain output. 3.3 V output levels. u163 5 V tolerant TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 67
O Analog Right Channel Output - typically 3.5 Vp-p for a full-scale input signal. AGND Analog Ground - analog ground reference is 0V. Analog Power - analog power supply is nominally +5V. AOUTL O Analog Left Channel Output - typically 3.5 Vp-p for a full-scale input signal. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 68
T3 IN T3 OUT 400kΩ T4 IN T4 OUT R1 OUT R1 IN 5kΩ R2 OUT R2 IN 5kΩ R3 OUT R3 IN 5kΩ R4 PUT R4 IN 5kΩ R5 OUT R5 IN 5kΩ u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
(at 100 to 150 degrees C for 100 to 120 seconds) is recommended, as shown in the temperature profile for IR reflow. The number of times of reflow should be three or less. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 71
In such cases, be sure to perform baking under the conditions mentioned in paragraph 4 above. If degradation of packaging seal is considered to have occurred before delivery to you, return the products to our representative or us. L 13942296513 u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 72
Tory package at 125°C. And the d esicca tion can n ot be applied for m agazine (stick) package, paper glue taping package and emboss tapin g package. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Page 73
Tory package at 125°C. And the d esicca tion can n ot be applied for m agazine (stick) package, paper glue taping package and emboss tapin g package. u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...
Telephone line satellite antenna programs) connection jack 14/18V 350mA IOIOI 230V 50Hz Audio output terminal PERITEL Connection of power Serial computer for connecting a stereo Video terminal connection terminal cord (Cord provided to system terminal) u163 TS7, BCT-1710, BCT-1720, BCT-1730 http://www.xiaoyu163.com...