Table of Contents
Advertisement
TG5230AL.fm Page 54 Friday, June 11, 2004 5:31 PM
Special Features
Incoming Call Tone
During an intercom call (p. 42) or while using the Room Monitor feature, you can be
informed of incoming calls by two tones.
If this feature is turned on, incoming call tones will be heard for as long as the line is
ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If
this feature is turned off, no tones will be heard. This factory preset is "2".
Using the handset, this feature can be set separately for the handset and base unit.
Handset incoming call tone
1
Press [MENU].
2
Press the soft key (
setting".
3
Scroll to "Incoming call." by pressing
[d] or [B], then press the soft key (
4
Select "On", "Off" or "2" by pressing [d] or
[B].
5
Press the soft key (
Base unit incoming call tone
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set base unit" by pressing [d]
or [B], then press the soft key (
4
Scroll to "Incoming call." by pressing
[d] or [B], then press the soft key (
5
Select "On", "Off" or "2" by pressing [d] or
[B].
6
Press the soft key (
54
Handset Base Unit
Handset
at "Ringer
)
SELECT
SELECT
), then press [OFF].
SAVE
Handset
SELECT
).
SELECT
SELECT
), then press [OFF].
SAVE
Ringer setting
Incoming call.
).
Incoming call
tone :2
Initial setting
).
Set base unit
Incoming call.
).
Incoming call
tone :2
Advertisement
Chapters
Table of Contents
