Table of Contents
Advertisement
Before Requesting Help
General
Problem
The unit does not work.
You cannot program items,
such as the day and time
adjustment.
Previously programmed
information is erased.
"Recharge battery" is
displayed on the handset,
"
" flashes or the unit
beeps intermittently.
You charged the battery
fully, but "Recharge
battery" is still displayed
and/or "
flash.
78
" continues to
Remedy
•Check the settings (p. 10–13).
•Charge the battery fully (p. 11).
•Clean the charge contacts and charge
again (p. 12).
•Install the battery properly (p. 71).
•Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
•Re-install the battery and place the
handset on the base unit (p. 71). Try
again.
•KX-TG2583ALB/KX-TG2583ALS and
KX-TG2583NZS are not designed to be
used with rotary (pulse dialling) services.
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory
list, or while the answering system is in
use.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•Make sure that the unit is in the standby
mode.
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•Charge the battery fully (p. 11).
•Clean the charge contacts and charge
again (p. 12).
•Install a new battery (p. 71).
Advertisement
Table of Contents
