Canon ipf6350 User Manual page 921
Hide thumbs
Also See for ipf6350:
- User manual (1110 pages) ,
- Basic manual (52 pages) ,
- Setup manual (12 pages)
Table of Contents
Advertisement
System
Nozzle Check
Setup
Use RemoteUI
Reset PaprSetngs
Erase
High Speed
HDD
Data
Secure High Spd.
Secure
Output
Print
Meth-
Print (Auto Del)
od
Save: Box 01
Print After Recv
Common Box Set.
Show Job Log
Prep.MovePrinter
Ad-
Change Password
min.
Menu
iPF6350
Setting Item
Printer Parts
Description, Instructions
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Restores settings that you have changed with Media
Configuration Tool to the default values.
Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on
the Printer's Hard Disk.")
→P.920
Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.920
Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed
to check if the data was correctly written. (See
"Erasing Data on the Printer's Hard Disk.")
→P.920
Select the printing method for jobs received from
software other than the printer driver. When using
the printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Select Print (Auto Del) to print without saving jobs
in the box shared among multiple users.
Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.")
→P.996
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
By setting a password, you can restrict menu display
and configuration as follows. Enter a number in the
range 0–9999999.
>
Control Panel
>
9
903
Menu Settings
Advertisement
Chapters
Table of Contents
Troubleshooting
