Adjusting Line Length (Adjust Length) - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:

Table of Contents

Additionally, two modes are available in both AdjustmentPrint and Change Settings : A:High or B:Standard/Draft.

Choose the mode that suits your particular printing application.

This setting is applied when Highest or High is selected in Print Quality in the printer driver.

• B:Standard/Draft

This setting is applied when Standard or Draft is selected in Print Quality in the printer driver.

• Always check the Adj. Priority values before using Adjust Length. (See "Selecting a Feed Amount Ad-

justment Method (Feed Priority).")

• Use paper of the same type and size for adjustment as you will use for printing.

Items to Prepare

• An unused roll at least 10 inches wide

• High-precision ruler

• One sheet of unused paper of at least A4/Letter size

• High-precision ruler

Perform adjustment as follows.

Load the paper.

• Loading Rolls on the Roll Holder

• Loading Rolls in the Printer

• Loading Sheets in the Feed Slot

• Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment

cannot be completed correctly unless the loaded paper matches the settings.

On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (

• If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.

The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Adjust Printer, and then press the OK button.

Press ▲ or ▼ to select Feed Priority, and then press the OK button.

Adjustments for Better Print Quality

Adjusting the feed amount

Adjusting Line Length (Adjust Length)

Table of Contents