Manual Banding Adjustment (Adj. Quality) - Canon ipf6350 User Manual
Hide thumbs
Also See for ipf6350:
- User manual (1110 pages) ,
- Basic manual (52 pages) ,
- Setup manual (12 pages)
Table of Contents
Advertisement
Adjustments for Better Print Quality
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Feed Priority, and then press the OK button.
6.
Press ▲ or ▼ to select Adj. Quality, and then press the OK button.
7.
Press ▲ or ▼ to select Auto(GenuinePpr) or Auto(OtherPaper), and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll or a sheet of A2 size or larger.
8.
If you are printing on sheets smaller than A2 size for Auto(OtherPaper), a confirmation message is shown on the
Display Screen requesting you to continue printing.
Press the OK button and follow the instructions on the Display Screen.
Manual Banding Adjustment (Adj. Quality)
If printed images are affected by banding in different colors, execute Adj. Quality for adjustment of the paper feed amount.
Use Manual adjustment with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper)
cannot be used.
(See "Automatic Banding Adjustment (Adj. Quality).")
Manual adjustment requires you to enter an adjustment value after a test pattern is printed.
Note
8
• Always check the Adj. Priority values before using Manual adjustment.
(See "Selecting a Feed Amount Adjustment Method (Feed Priority).")
• If additional fine-tuning is necessary after Manual adjustment, use Adj. Fine Feed.
(See "Fine-Tuning the Paper Feed Amount (Adj. Fine Feed).")
• Use Adjust Length to ensure that lines in CAD drawings are printed at exactly the right length.
(See "Adjusting Line Length (Adjust Length).")
• Use paper of the same type and size for adjustment as you will use for printing.
Items to Prepare
Rolls
An unused roll at least 10 inches wide
Sheets
Two sheets of unused paper of at least A4/Letter size
Perform adjustment as follows.
1.
Load the paper.
• Loading Rolls on the Roll Holder
830
• Loading Rolls in the Printer
• Loading Sheets in the Feed Slot
Manual Banding Adjustment (Adj. Quality)
>
Adjusting the feed amount
→P.778
Note
• Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
>
→P.828
→P.832
→P.774
→P.803
→P.827
→P.832
iPF6350
Advertisement
Chapters
Table of Contents
Troubleshooting
