How To Replace The Airclean Filter; How To Replace An Active Airclean 30 Filter Or A Hepa Airclean 30 Filter; Replacing One Type Of Exhaust Filter With Another; When To Change The Thread Lifters - Miele HS05 Operating Instructions Manual
Hide thumbs
Also See for HS05:
- Operating instructions manual (27 pages) ,
- Operating instructions manual (104 pages)
Table of Contents
Advertisement
Available languages
Available languages
en
How to replace the AirClean filter
(dia. 32 + 33)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Release the filter grille and raise it
upwards. Grasp the used AirClean fil-
ter by the clean, unsoiled section
(see arrow) and take it out.
^ Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
30 filter or a HEPA AirClean 30 filter
please see "Replacing one type of
exhaust filter with another".
^ Close the filter grille.
^ Close the dust compartment lid.
How to replace an Active AirClean 30
filter or a HEPA AirClean 30 filter
(dia. 34 + 35)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Release the exhaust filter and remove
it.
^ Insert a new exhaust filter making it
sure it goes in properly, then push it
down into position.
^ Press the exhaust filter change
indicator ~ (dia. 13).
^ After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 14).
38
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
^ Close the dust compartment lid.
Replacing one type of exhaust filter
with another
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
10):
a AirClean
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
When changing the filter please note:
1. If you wish to replace exhaust filter a
with filter b or c, it is essential that you
remove the filter grille before fitting the
new type of filter (dia. 35).
You will also need to press the exhaust
filter change indicator (dia. 13).
2. If you wish to replace exhaust filter b
or c with filter a, it is essential that you
also fit the filter grille * (dia. 36).
* Filter grille - see "Optional accessories".
Do not use more than one exhaust
filter at a time.
When to change the thread lifters
The thread lifters on the suction inlet to
the floorhead can be replaced.
Check them from time to time and
replace them if the pile has worn down.
Hide quick links:
Advertisement
Chapters
Table of Contents
