Table of Contents
Advertisement
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
EBU18102
Start switch "
"
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
4
EBU18155
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
ECB00044
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it. (See page 8-42.)
".
/
/OFF"
" to turn on the low beams
" to turn on
EBU18283
Throttle lever
Once the engine is running, pushing the throttle le-
ver will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine
will return to an idle any time the throttle lever is re-
leased.
1. Throttle lever
Before starting the engine, check the throttle to be
sure it is operating smoothly. Make sure it returns
to the idle position as soon as the lever is released.
4-4
1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
