Specifications - Toro 70185 Operator's Manual
Rear-engine riding mower
Hide thumbs
Also See for 70185:
- Operator's manual (36 pages) ,
- Setup instructions (9 pages) ,
- Setup instructions (4 pages)
Table of Contents
Advertisement
1. Disengage
2. Engage
Disengaging the Blade
1. Depress the brake pedal to stop the machine.
2. Shift the blade control (PTO) to Disengage
(Figure 7).
Setting the Height of Cut
Use the height-of-cut lever to raise and lower the mower
to the desired cutting height. You can set the cutting
height to 1 of 4 positions from approximately 3.8 to 9
cm.
1. Disengage the blade control (PTO).
2. Pull on the height-of-cut lever, move it to the
desired position, and release it slowly into the notch
(Figure 8).
1. Height-of-cut lever
Figure 7
3. Blade control (PTO)
Figure 8
Specifications
Model
Weight
70185
390 lb
(177 kg)
70186
390 lb
(177 kg)
11
Length
Width
Height
74 in
34 in
(188 cm)
(86 cm)
74 in
34 in
(188 cm)
(86 cm)
41 in
(104 cm)
41 in
(104 cm)
- Quick Links:
- Controls
- Specifications
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
