Table of Contents
Advertisement
Specifications
General Specifications
Configuration
Engine
Instrumentation
Gas Tank
Battery
Drive
Hydraulic Oil Filter
Hydraulic Oil Reservoir
Valve
Cylinder
Wheel Bearings
Tires
Speeds (at 3200 RPM)
Seat Adjustment
Measurements
Width without implement
Width with rake Model No.
08812
Height
Length without rake
Net weight (wet)
Sand Pro 2020
Sand Pro 3020
Short wheel base tricycle vehicle with mid engine placement. Front wheels
powered on 2020 and all wheels powered on 3020. Front wheel steering. Operator
positioned centrally.
Briggs & Stratton, V-twin cylinder, 4 cycle, OHV, air cooled, gas engine with cast
iron sleeves. 16 hp @ 3600 RPM, 29.3 cu. in. (480 cc) displacement, 1-3/4 US qt.
(1.66 l) oil capacity. Electronic ignition. Full pressure lubrication, oil filter. Engine
and remote mounted air cleaners.
Hour meter
4-1/4 gallon (16.1 l) capacity
12 volt, lead acid, 32 amp. hour
Hydraulic. Coupling driven variable displacement piston pump with integral auxiliary
charge pump to geroller motors which directly drive wheels.
25 micron, spin-on type
3 gallon (11.4 l) capacity
Single section for raising and lowering of implement with float
Double acting
Needle bearing in each wheel motor
22 x 11.00-8 two-ply pneumatic tubeless. De-mountable and interchangeable.
Recommended tire pressure is 4–6 psi (28–41 kPa).
Variable between 0 and 9 MPH (0 and 14 km/h) forward and 0 and 4 MPH (0 and
6 km/h) reverse
4 inches (10.2 cm) fore and aft.
57-1/2 in. (146 cm)
75 in. (191 cm)
45 in. (114 cm)
76 in. (193 cm)
650 lb.( 295 kg)
700 lb. (318 kg)
7
Advertisement
Table of Contents
