hit counter script

Positioning The Flow Baffle; Positioning The Seat - Toro 74242 Z500 Z Master Operator's Manual

With 52in turbo force side discharge mower
Table of Contents

Advertisement

Positioning the Flow Baffle

The following figures are only recommendations for use.
Adjustments will vary by grass type, moisture content,
and height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for this
position is a follows.
Use for short, light grass mowing conditions.
Use in dry conditions.
For smaller grass clippings.
Propels grass clippings farther away from the mower.
Full Rearward Position
Figure 23
Position B
Use this position when bagging.
Middle Position
Figure 24
Position C
This is the full open position. The suggested use for this
position is as follows.
Full Forward Position

Positioning the Seat

m–6881
The seat can move forward and backward. Position the
seat where you have the best control of the machine and
are most comfortable.
1. To adjust, move the lever sideways to unlock the seat
2. Slide the seat to the desired position and release the
m–6880
24
Use in tall, dense grass mowing conditions.
Use in wet conditions.
Lowers the engine power consumption.
Allows increased ground speed in heavy conditions.
This position is similar to the benefits of the Toro SFS
mower.
Figure 25
(Fig. 26).
lever to lock it in position.
1
Figure 26
1. Adjustment lever
m–6879
m–3655

Advertisement

Table of Contents
loading

Table of Contents