The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for u163 CLASS 1. A specially instructed person should do servicing operation of the apparatus. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 3
CAUTION Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacture. Discord used batteries according to the manufacture's instructions. L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 4
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
How to enter : Press RESET while pressing [FORWARD] and [EJECT] keys together. How to exit : Same procedure to enter this mode. 11. When EEPROM is initialized, eject lock may be enabled. Please cancel eject lock in this case. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden). The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
2. SPECIFICATIONS 3 7 63 1515 0 2.1 SPECIFICATIONS AVH-P2300DVD/XNUC General Phase ........Normal/Reverse Power source......14.4 V DC (10.8 V to 15.1 V Bass boost: allowable) Gain ........+12 dB to 0 dB Grounding system....Negative type DVD Player Maximum current consumption .............10.0 A...
Frequency range...... 531 kHz to 1 602 kHz (9 kHz) 530 kHz to 1 640 kHz (10 kHz) Usable sensitivity..... 25 μV (S/N: 20 dB) u163 Signal-to-noise ratio....62 dB (IEC-A network) Note Specifications and the design are subject to mod- ifications without notice. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 10
Gain ........+6 dB to –24 dB Signal-to-noise ratio....62 dB (IEC-A network) Phase ........Normal/Reverse Bass boost: Note Gain ........+12 dB to 0 dB Specifications and the design are subject to mod- ifications without notice. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Use to connect an auxiliary device. SRC/OFF CAUTION Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB mem- ory as any device connected directly to the u163 unit will protrude out from the unit and may be dangerous.
Press to go to the next REAR SRC Not used. track (chapter). Press to stop play- back. Press to select the next/previous disc/ folder. (FOLDER/P.CH) Press to recall radio station frequencies as- signed to preset tun- ing keys. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools DVD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Is it OK? cleaned? cleaning Replace the PICK UP Check point: Error rate check Error rate check PICK UP Perform lens Is it OK? cleaning cleaned? Replace the PICK UP Ckeck parts Finished other than PICK UP u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 32
10 - 65 (mA) Expansion NO. Disc Check Point Threshold Remarks: LD current L 13942296513 TCD-782 CDLD1-VCC5_3 60 - 360 (mV) 10 - 60 (mA) Expansion Notes: Please pay attention to the laser diode damage by static electricity. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 33
GGV1025 ID: 40000 1.000E-03 less than GGV1025 ID: 200000 1.000E-03 less than TCD-782 ID: HOME Position 2.500E-03 Test mode display will not appear on the display of this product. Connect the rear monitor output to a monitor. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 35
<Check> Check the voltage at the “STANBY” test point while the power is on. Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit STANBY-DGND1 VCC33 V- 0.6 V or more Side A L 13942296513 DGND1 STANBY Fig 1.1: STANBY check point u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 37
<Check> Check the voltage at the “XRES” test point while the power is on. Use the “DGND1” test point at the reference. Check point Module No. Specification value Unit 1 XRES-DGND1 VCC33 × 0.7 or more Side A L 13942296513 DGND1 NRES Fig 3.1: RESET check point u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 38
Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit 1 VSENS - DGND1 0.95 - 1.07 VD8 = 8.0 ± 0.4 V L 13942296513 Side A VSENS DGND1 Fig 4.2: VSENS check point u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 39
Specification value Check point Module No. Unit 27 MHz 2 IC1501 169pin ± 50 ppm L 13942296513 Specification value Fig 5.2: Clock specification value Side A IC1501 158pin DGND1 u163 Fig 5.3: 27 MHz check point AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 40
Be careful as XCSM, XWE, XCAS and XRAS of IC1480 are called differently in IC1501, namely NCSM, NWE, NCAS, NRAS. IC1501 MA0 - 11 1480 DV5U MDQ0 - 15 SDRAM XWE(NWE) XCAS(NCAS) XRAS(NRAS) XCSM(NCSM) DQM0 DQM1 Fig 6.1: SDRAM I/F L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 42
3 7 63 1515 0 Side B Check point 1 (IC1480) Side A L 13942296513 Check point 2 (IC1501) Fig 6.2: SDRAM I/F check point u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 43
Specification value Unit VD8_1 - PGND3 8.0 ± 0.4 VD - PGND3 8.0 ± 0.4 VCC5_1- AGND1 5.0 ± 0.1 Side A AGND3 VCC5_ 1 L 13942296513 PGND1 VD8_ 1 PGND3 Fig 7.2: VD8, VCC5 voltage check points u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 44
Check with PGND and GNDAU being the reference. Check point Module No. Specification value Unit VD - PGND_3 8.0 ± 0.4 AVCC5 - GNDAU1 5.0 ± 0.1 Side A L 13942296513 AVCC5 PGND3 GNDAU1 Fig 8.2: VD8, AVCC5 voltage check points u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 45
36.864 0 MHz ± 300 ppm DACCK 2.0 V~VCC33 V DGND~0.8 V 33.868 8 MHz ± 300 ppm DACCK 2.0 V~VCC33 V DGND~0.8 V Specification value 1 L 13942296513 Specification Specification value 2 value 3 Fig 9.2: Clock specification value u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 46
3 7 63 1515 0 Side B Check point 1 (DACCK stylus) Side A L 13942296513 Check point 2 (IC1501 148 pin) DGND2 Fig 9.3: 27 MHz, DACCLK check point u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 47
VCC33 V-0.6 V or higher 0.4 V or lower Waveform 2 LRCK VCC33 V-0.6 V or higher 0.4 V or lower Waveform 3 L 13942296513 Specification value 2 Specification value 1 Fig 10.2: Serial 3 lines specification value u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 48
3 7 63 1515 0 Side A DGND2 ADOUT LRCK Side B L 13942296513 SRCK Fig 10.3: Serial 3 lines check points u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 49
Fig 10.5: Analog audio out check point Check with DGND being the reference. Specification value 2 Check point 1 (stylus) Specification value 1 Reference waveform 6 IEC VCC33 V-0.6 V or higher 0.4 V or lower Waveform 5 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 50
3 7 63 1515 0 Side A IEC DGND2 Fig 10.6: Digital audio signal (IECOUT) check point L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 51
In case of NG, check the applicable line, the periphery of the major components in the drawing above, soldering of the peripheral components and defective components. L 13942296513 PEAK Reference COMPOSITE signal value Color burst Pedestal level BOTTOM Horizontal sync signal Fig 11.2: Waveform for the case of composite white 100% output u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 52
3 7 63 1515 0 Side A COMPOSITE GNDV Fig 11.3: VIDEO signal check point L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 53
(Refer to the FE test mode for the method of displaying the LD energizing time.) 2.If the second digit from the left of the energizing time display is showing E, such as “ E ”, it means that the flash memory has reached its life. Example: 0E000BB8 L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 54
In case of NG, check the applicable line, periphery of IC1501, soldering of the peripheral components and defective components. Specification value Check point Module No. Unit 48 MHz 2 IC1501 50pin-DGND1 ± 50 ppm L 13942296513 Specification value Fig 13.2: Clock specification value u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 55
3 7 63 1515 0 Side A IC1501 50pin DGND1 Fig 13.3: 48 MHz check point L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 56
1.USB Memory: Play a song from USB memory and check D+ and D- with the DGND standards. 2.iPod: Connect iPod and check CP_RESET, SDA and SCL with the DGND standards until the pioneer log appears. Play a song from iPod and check D+/D- with the DGND standards.
Page 57
3 7 63 1515 0 Side A SDATA CP_ RESET SCLOCK DGND2 L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
"ERROR02-A2" A2h L0 adjustment is NG Adjustment of L1 is NG ERROR-02-A3 "ERROR02-A3" A3h L1 adjustment is NG LD system NG ERROR-02-A4 "ERROR02-A4" A4h LD system NG Gain adjustment system NG ERROR-02-A5 "ERROR02-A5" A5h Gain adjustment system NG AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 62
The time for the generation is the time set by the audio property notice wait time set by the connection confirmation command. *10 It is generated when the DRM information update notice is sent from DVD mecha and the response of DRM information update is not returned. L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 63
USB memory memory and do consumes more not use it. Turn the than maximum ignition switch to allowable cur- OFF, then to ACC rent. or ON and then connect a compli- ant USB portable audio player/USB memory. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 64
Bluetooth switch OFF and module of this then to ACC or ON. unit. If the error mes- sage is still dis- played after performing the above action, please contact your dealer or an authorized Pioneer Service Station. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Choose "Version Check" among the monitor test mode menu screen. [Display specifications] When 8 digits of read number is strange, displayed with red. [Operation specification] Operational description Remote controller key Return to test mode mene Page up Page down u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 67
In case the EEPROM initialization has been performed. In case the adjustment value has been initialized. Calibration inspection : In case the calibration inspection has never been performed. In case the EEPROM initialization has been performed. u163 In case the adjustment value has been initialized. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 68
X/Y information of [MIN] and [MAX] of the outermost circumference are displayed. [BEFOR] indicates the value stored in the EEPROM. [AFTER] indicates MIN/MAX of the A/D value currently captured. u163 [Operation specification] Operational description Remote controller key Return to top mene AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 69
Order of display of the locations to be pressed. L 13942296513 This point is intended to end the calibration inspection, and therefore, the corrected value of this point is not obtained. [Operation specification] Operational description Remote controller key Return to top mene u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 70
: The coordinate (X direction, Y direction) which is the result of adding the correction by calibration to the normalized coordinate is displayed. 16 calibration points "+" are displayed in white. [Operation specification] Operational description Remote controller key Return to top mene u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 71
The incorrect touch will make the characters of cursor turn red. Repeat this for 4 points, and “OK” is displayed upon the last press of 4th point. [Display specifications] confirming The pushing order L 13942296513 [Operation specification] Operational description Remote controller key Return to top mene u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 72
When the adjusted value has been initialized (Data initialize). When the EEPROM has been initialized. u163 [Operation specification] Operational description Remote controller key Selection cursor up movement Selection cursor down movement Return to test mode mene Menu enter AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 73
When normally ends, "success" is displayed. When will not end in four seconds, judged to be abnormal, "failure" is displayed. u163 [Operation specification] Operational description Remote controller key Selection cursor left movement Selection cursor right movement Return to test mode mene Menu enter AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 74
Display of monochrome stripe signal (1dot Width) [Operation specification] Operational description Remote controller key Return to test mode mene [COLOR BAR] Display of color bar signal [Operation specification] Operational description Remote controller key Return to test mode mene u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 75
[Operation specification] Operational description Remote controller key L 13942296513 Return to test mode mene Next signal [CENTER MARKER] Display of signal for screen central location setting. [Operation specification] Operational description Remote controller key Return to test mode mene u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
In order to F close after focus search (S character measurement mode), set to Power_OFF first then power on again FEMIN level before F close. u163 ASMAX level ENVMAX level FE normalization coefficient Spindle gain coefficient TEMAX level indication TEMIN level indication AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 77
Designation of digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4). Fix by command (5). Error occurrence at Power_OFF [Note] If an error occurs at Power_OFF, reset cannot be made. In such a case, it is necessary to turn the power off and start the test mode once again. u163 Error display AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 78
[Note] If the power on time is 999999 hours or more, it is always reported as 999999 hours. [Note] If the power on time is “*E** ****”, the value may not be correct due to the life of the flash memory. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 79
3: CD 5 Return select 4: CD-RW CRG moves 5: Return to the most outer <Error> ERROR 1: Power OFF select Code : 00000000 Please Input Number <Error : Power OFF> ERROR u163 Code : 00000000 Please Reset AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Removing the Monitor PCB (Fig.4) Disconnect the two FFC. Remove the five screws and then remove the Monitor PCB. Fig.4 Monitor PCB u163 Removing the Keyboard PCB (Fig.5) Keyboard PCB Remove the screw and then remove the Keyboard PCB. Fig.5 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 81
L 13942296513 Remove the three screws and then remove the Heat Sink and Holder. Fig.7 Removing the the Upper Chassis (Fig.8, 9) Upper Chassis Fig.8 Remove the four screws and then remove the Upper Chassis.(Fig.9, 10) Fig.9 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 82
Removing the Service Unit (Mother Assy) (Fig.10) Service Unit (Mother Assy) Remove the three screws. Straighten the tabs at two locations indicated. Remove the two screws and then remove the Service Unit (Mother Assy). Fig.10 L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 83
3 7 63 1515 0 How to have it 1.Have a specified part. Handling OK Handling NG L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 84
It is not a problem, but please try not to let it idle as much as possible. GND the brown line 4V to the gray line Fig. 1 Fig. 2 L 13942296513 Relay FFC Connector (relay FFC) u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 85
Fig. 1 T-case washer Drive gear Fig. 2 L 13942296513 c.Clamp state with no disc loaded a.Ejecting state b.Open-lock state There is a There is space no space u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 86
6.As in the Figures, while supporting the location A with your fingers, Fig. 6 screw the relay PCB. (Fig. 7 / Fig. 8) 7.Solder the lead for the CRG motor. 8.Fit the relay FFC to the connector. Fig. 7 Fig. 8 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 87
2.Apply 1.5V to the CRG motor and then transfer the PU to the outer periphery. (Precaution) Do not forget to reinstall the relay FFC after sending the PU to the outer periphery and take the necessary measures. u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Laser didoes may be damaged, if the volume switch for the minus side of the probe, the body frame of the the laser power adjustment of the pick up unit, is turned. measurement device should be set to floating ground. L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 89
Symptom in case the adjustment is not adequate: Worsening of the error rate 10 (Normally 10 or less.) Large RF jitter u163 RF waveform distortion Tracking drawing/Unstable servo * Caution: Do not look into the laser light during adjustment. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 90
Next, slightly turn the skew adjusting screw B so the level would reach its maximum. Slightly turn the skew adjusting screw A again so the level would reach its maximum. (Make adjustment in the order of A->B->A and in the end complete adjustment by turning each screw in the clockwise direction.) AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 91
5: CRG Move Outer 6: Eject Please Input Number 12. In order to produce the clamping state with no disc loaded, slightly move the disc detection arm in the counterclockwise direction while moving the switch arms outward. Switch arms u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 92
CRG Move Outer 1: Power OFF Please Input Number 15. TEST MODE Select “6: Eject.” TEST MODE 1: LD ON 2: ASMAX 3: Skew Adjustment 4: Error Rate u163 5: CRG Move Outer 6: Eject Please Input Number AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 93
3 7 63 1515 0 Locations to make SKEW adjustment Locations to adhere the SKEW 1,2,3: BOND QUICK MENDER L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 94
3 7 63 1515 0 Bond for resonance 4:Three Bond 1530 L 13942296513 adhesive Bond for locking the screw 5,6 : Three Bond 1401M Bond for locking the screw u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 95
Precautions on handling the PU *Precaution: Do not touch those shaded areas in the following figures. Hologram (Beware of the static) Do not touch the optical part RF level adjusting part Do not touch the spring L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
The clock signal is output from the CLKOUT terminal IC601(Pin 86). The frequency of the clock signal is 31.45728 MHz. If the clock signal out of the range, the X’tal (X601) should be replaced with new one. L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.) 9.1 PACKING L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 103
12-5 Service network Card See Contrast table (2) Contain Box See Contrast table (2) Protector See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/...
Page 105
CNB3544 Seal See Contrast table (2) Holder CND4809 Heat Sink CNR2099 Screw See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/ Mark Description XNUC...
Page 109
See Contrast table (2) Insulator CNN2764 Sheet See Contrast table (2) Service Unit(Mother Assy) See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/ Mark...
( C ) L 13942296513 ( A ) ( A ) ( C ) ( A ) ( C ) ( C ) ( C ) ( C ) u163 (A) : GEM1045 (B) : GEM1038 (C) : GEM1024 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 112
( C ) ( C ) ( C ) ( C ) ( C ) ( C ) ( A ) L 13942296513 ( A ) ( A ) u163 (A) : GEM1045 (B) : GEM1038 (C) : GEM1024 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
LIN3 8.4V B.Cam VDSAG1 ARET3 RCA_V VDOUT1 RIN3 R312 AVCC AV SEL OUTPUT FM(30%): -15 dBs MONIT SYS+B AM(30%): -15 dBs 8.4V AUX:+2.2 dBs VCR:+2.2 dBs iPod(AUX):+1.3 dBs LS1:+5.1 dBs USB:+5.1 dBs u163 GNDA GNDV CHIP ANALOG BUS AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 115
No differentiation is made between chip resistors and MOTHER PCB 1608 discrete resistors. 2125 INTERFACE PCB 3216 Symbol indicates a capacitor. KEYBOARD PCB No differentiation is made between chip capacitors and MONITOR PCB NM : No Mount discrete capacitors. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 123
The > mark found on some component parts indicates CHIP SIZE LEGEND 1608 the importance of the safety factor of the part. 2125 Therefore, when replacing, be sure to use parts of 3216 : The power supply is shown with the marked box. identical designation. AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
COIL V DSCSNS HALL W+ DSCSNS1 DSCSNS1_B DSCSNS0 DSCSNS0_B CSN1068-A HALL W- R103 HALL V+ S102 HALL V- HALL U+ HALL U- HALL BIAS- CRGP CRG+ CRGM LOAD/CRG MOTOR CRG- CXC4026 L 13942296513 SPINDLE MOTOR EXM1050 CN101 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
IC 301 (A, 91, 111) IC NJM2068V Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. IC 1061 (A,51,27) Regulator IC S-1172B34-E6 A:AVH-P2300DVD/XNUC IC 1201 (B,39,65) IC AN33012UA B:AVH-2350DVD/XNRC IC 3501 (A,9,91) IR RC REC Module PNJ4833M...
Page 163
(A,88,79) Inductor CTF1786 L 152 (A,22,123) Chip Coil BTH1101 L 5700 (A,11,28) Inductor CTF1748 L 153 (A,11,120) Inductor CTF1547 L 5701 (A,5,40) Inductor CTF1545 L 401 (A,165,90) Chip Coil LCTAWR15J2520 L 5702 (A,18,39) Choke Coil 10 uH CTH1435 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 164
R 502 (A,70,98) RS1/16SS332J R 110 (A,143,116) RS1/16SS821J R 505 (A,117,72) (A) RS1/16SS101J R 506 (A,117,74) (A) RS1/16SS101J R 111 (A,141,116) RS1/16SS821J R 112 (A,149,116) RS1/16SS821J R 507 (A,118,70) (A) RS1/16SS102J R 113 (A,99,120) RS1/16SS102J R 509 (B,100,61) RS1/16SS471J AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 165
R 2512 (A,34,10) RS1/16SS471J R 681 (B,129,47) RS1/16SS222J R 2513 (A,35,10) RS1/16SS471J R 2516 (B,116,10) (A) RS1/16SS102J R 682 (A,158,47) RS1/16SS223J R 2517 (B,116,12) (A) RS1/16SS181J R 683 (B,143,46) RS1/16SS103J R 684 (B,138,46) RS1/16SS104J R 2518 (B,116,11) (A) RS1/16SS223J AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 166
(A,117,78) RS1/10SR561J R 5702 (A,6,24) RS1/16SS273J R 5219 (A,119,77) RS1/10SR680J R 5703 (A,5,38) RS1/16SS473J R 5220 (A,123,75) RS1/16SS330J R 5704 (A,31,38) RS1/16SS3301F R 5221 (A,122,80) RS1/16SS101J R 5705 (A,8,32) RS1/16SS102J R 5222 (A,129,61) RS1/16SS562J R 5706 (A,29,22) RS1/16SS472J AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 167
(A,143,78) CCSSCH820J50 C 211 (B,129,100) CKSQYB225K10 C 428 (A,145,73) 2.2 uF CCG1205 C 212 (B,121,101) 10 uF CCG1192 C 431 (A,147,66) CKSSYB104K10 C 213 (B,122,85) CKSRYB105K10 C 432 (A,149,67) CKSSYB104K10 C 214 (B,120,98) CKSRYB105K10 C 433 (A,150,67) CKSSYB104K10 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 168
C 1021 (A,9,107) CEVW101M16 C 1022 (B,16,91) CKSYB105K35 C 5122 (A,86,36) CKSSYB104K10 C 1044 (A,164,58) Capacitor CEVW221M10 C 5124 (B,81,44) 10 uF DCH1201 C 1045 (B,156,54) CKSQYB225K10 C 5140 (A,109,49) CCSSCH6R0D50 C 1046 (B,157,52) CKSRYB474K10 C 5141 (A,109,42) CCSSCH6R0D50 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 169
(A,40,61) CKSSYB104K10 L 1512 (A,57,5) Inductor CTF1743 L 1902 (B,5,8) Inductor CTF1487 C 5488 (A,41,63) CKSSYB104K10 L 1903 (B,12,11) Inductor CTF1558 C 5489 (A,43,64) CKSSYB104K10 C 5490 (A,46,71) CKSSYB104K10 L 1904 (B,46,19) Inductor CTF1473 C 5491 (A,50,70) CKSSYB104K10 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 170
RAB4CQ560J u163 R 1954 (A,35,17) RS1/16SS153J R 1489 (B,59,5) RS1/16SS560J R 1955 (A,40,14) RS1/16SS153J R 1490 (B,50,21) RS1/16SS560J R 1956 (A,40,18) RS1/16SS0R0J R 1501 (B,46,7) RS1/16SS122J R 1957 (A,40,15) RS1/16SS0R0J R 1503 (B,45,8) RS1/16SS105J R 1504 (B,45,13) RS1/16SS120J AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
Page 171
(B,42,29) CCSRCH680J50 C 1505 (A,53,5) CKSSYB104K10 C 1950 (B,73,33) CKSSYB104K10 C 1506 (A,55,5) CKSSYB104K10 C 1951 (B,74,36) CCSSCH100D50 C 1507 (A,62,5) CKSSYB104K10 C 1952 (B,78,36) CCSSCH100D50 C 1508 (A,66,5) CKSSYB104K10 C 1954 (B,43,49) CCSRCH470J50 C 1509 (A,69,5) CKSSYB104K10 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...
(B,12,23) Switch(DSCSNS) CSN1068 S 103 (B,22,10) Switch(8SNS) CSN1068 R 101 (B,52,27) RS1/16S101J R 102 (B,15,29) RS1/16S101J R 103 (B,16,11) RS1/16S101J C 101 (B,51,23) CKSRYB104K50 Miscellaneous Parts List Pickup Unit(Service) CXX2398 Motor Unit(LOAD/CRG) CXC4026 Motor(SPINDLE) EXM1050 L 13942296513 u163 AVH-P2300DVD/XNUC http://www.xiaoyu163.com...