Security Features (Mfc Model Only); Tx Lock; Setting And Changing The Tx Lock Password - Brother DCP-T300 Advanced User's Manual
Hide thumbs
Also See for DCP-T300:
- Quick start manual ,
- Basic user's manual (98 pages) ,
- Advanced user's manual (40 pages)
Table of Contents
Advertisement
Security features
2
(MFC model only)
TX Lock
TX Lock lets you prevent unauthorized
access to the machine.
While TX Lock is On, the following operations
are available:
Receiving faxes
1
PC-Fax Receive
(If PC-Fax Receive was already On)
1
While the TX Lock feature is turned on, your machine
will receive faxes and store them in its memory.
Then, when TX Lock is turned off, the faxes will be
sent to your chosen PC.
While TX Lock is On, the following operations
are NOT available:
Operation from the control panel
PC printing
NOTE
If you forget the TX Lock password, call
Brother Customer Service.
Setting and changing the
2
TX Lock password
NOTE
If you have already set the password, you
will not need to set it again.
Setting the password
Make a careful note of your password.
a
Press Menú (Menu), 3, 0, 1.
b
Enter a four-digit number for the
password.
Press OK.
c
When the LCD displays Verify:,
reenter the password.
Press OK.
d
Press Detener/Salir (Stop/Exit).
Changing the password
a
Press Menú (Menu), 3, 0, 1.
b
Press a or b to choose Set Password.
Press OK.
c
Enter a four-digit number for the old
password.
Press OK.
d
Enter a four-digit number for a new
password.
Press OK.
e
When the LCD displays Verify:,
reenter the password.
Press OK.
f
Press Detener/Salir (Stop/Exit).
2
2
2
2
2
5
Hide quick links:
Advertisement
Table of Contents
