Replacing An Ink Tank - Canon Pixma MX7600 Quick Start Manual
Hide thumbs
Also See for Pixma MX7600:
- Quick start manual (192 pages) ,
- Service manual (67 pages) ,
- Network setup manual (43 pages)
Table of Contents
Advertisement
Replacing an Ink Tank
Replacing Color or Black Ink Tanks
When color or black ink tanks (PGI-9PBK/Y/M/C or PGI-7BK) run out of ink, replace them using
the following steps.
1
Make sure that the machine is turned on, and
lift the Scanning Unit (Printer Cover) until it
stops.
The Paper Output Tray will open automatically and
the Print Head Holder moves to the center. If the
Paper Output Tray does not open automatically,
press the Open button (A) to open it.
Caution
If the Document Cover is opened, you cannot open
the Scanning Unit (Printer Cover). Be sure to open
the Scanning Unit (Printer Cover) with the
Document Cover closed.
Do not hold the LCD.
Do not hold the Print Head Holder to stop or move
it.
Do not touch the metallic parts or other parts inside
the machine.
2
Push the tab (B) of the ink tank whose lamp
is flashing fast and remove it.
Do not touch the Print Head Lock Lever (C).
3
Remove the orange protective cap (D) from
the ink tank.
Carefully hold the protective cap when removing it
to prevent the ink from staining your fingers.
Discard the cap once it is removed.
Important
Do not touch the electrical contacts (E) on the ink tank.
Doing so can cause the machine to malfunction or
become unable to print.
(A)
(E)
Replacing an Ink Tank
(B)
(C)
(D)
43
Hide quick links:
Advertisement
Table of Contents
