Removing The Memory Card - Canon Pixma MX7600 Quick Start Manual
Hide thumbs
Also See for Pixma MX7600:
- Quick start manual (192 pages) ,
- Service manual (67 pages) ,
- Network setup manual (43 pages)
Table of Contents
Advertisement
Caution
The memory card will stick out of the Card Slot, but do not force it into the slot any further. Doing
so damages the machine and the memory card.
Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If you
force the memory card into the Card Slot in the wrong orientation, you may damage the memory
card and/or the machine.
5
Confirm that the Access lamp has lit up.
6
Close the Card Slot Cover.
Removing the Memory Card
1
Open the Card Slot Cover.
2
Make sure that the Access lamp is lit, then remove the memory card.
Hold the part of the memory card that is sticking out to remove it from the machine.
Do not remove the memory card while the Access lamp is flashing.
Important
The Access lamp flashes while the machine is reading or writing data from/to the memory card.
Removing the memory card or turning off the machine while the Access lamp is flashing may
damage the data saved on the memory card. Do not remove the memory card while the Access
lamp is flashing.
3
Close the Card Slot Cover.
Printing the Photo Displayed on the LCD (Display
photo)
1
Prepare for printing.
(1) Turn on the machine.
(2) Load paper.
2
Insert the memory card.
(1) Press the MEMORY CARD button.
(2) Insert the memory card into the Card Slot.
See "Inserting the Memory Card" on page 18.
3
Select the print menu.
Use the [ or ] button to select Display photo, then press the OK button.
Printing from a Memory Card
19
Hide quick links:
Advertisement
Table of Contents
