Brother MFC-J615W Basic User's Manual page 78
Hide thumbs
Also See for MFC-J615W:
- Basic user's manual (131 pages) ,
- Manual del usuario (131 pages) ,
- User manual (129 pages)
Table of Contents
Advertisement
Printing (continued)
Difficulty
White horizontal lines appear in text
or graphics.
The machine prints blank pages.
Characters and lines are stacked.
Printed text or images are skewed.
Smudged stain at the top centre of
the printed page.
Smudged stain at the right or left
corner of the printed page.
Printing appears dirty or ink seems
to run.
Stains appear on the reverse side
or at the bottom of the page.
The machine prints dense lines on
the page.
The printouts are wrinkled.
Cannot perform "Page Layout"
printing.
Print speed is too slow.
Colour Enhancement is not
working correctly.
70
Suggestions
Clean the print head. (See Cleaning the print head on page 56.)
Make sure you are using Brother Original Innobella™ ink.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 18.)
Clean the print head. (See Cleaning the print head on page 56.)
Make sure you are using Brother Original Innobella™ ink.
Check the printing alignment. (See Checking the print alignment on page 58.)
Make sure the paper is loaded correctly in the paper tray and the paper side
guides are adjusted correctly. (See Loading paper and other print media
on page 9.)
Make sure the Jam Clear Cover is closed correctly.
Make sure the paper is not too thick or curled.
(See Acceptable paper and other print media on page 18.)
Make sure the paper is not curled when you print on the back side of the paper
with the Print Odd Pages and Print Even Pages settings.
Make sure you are using the recommended types of paper. (See Acceptable
paper and other print media on page 18.) Don't handle the paper until the ink is
dry.
Make sure you are using Brother Original Innobella™ ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type in the Basic tab of
the printer driver.
Make sure the printer platen is not dirty with ink. (See Cleaning the machine's
printer platen in appendix A in the Advanced User's Guide.)
Make sure you are using Brother Original Innobella™ ink.
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 9.)
Check Reverse Order in the Basic tab of the printer driver.
In the printer driver Advanced tab, click Colour Settings, and uncheck
Bi-Directional Printing for Windows
Make sure you are using Brother Original Innobella™ ink.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Advanced tab. Also, click Colour Settings, and make sure you uncheck
Colour Enhancement.
Turn the borderless feature off. Borderless printing is slower than normal printing.
®
(See Printing for Windows
User's Guide.)
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
®
or Bi-Directional Printing for Macintosh.
or Printing and Faxing for Macintosh in the Software
Advertisement
Table of Contents
Troubleshooting
