Asus SABERTOOTH Z170 MARK 1 Manual page 167
Hide thumbs
Also See for SABERTOOTH Z170 MARK 1:
- Instruction manual (140 pages) ,
- Accessory installation manual (10 pages)
Table of Contents
Advertisement
5.
Use the up/down arrow key to select a drive, and then press <Space> to select. A small
triangle marks the selected drive. Press <Enter> after completing your selection.
6.
Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
and 5 only),and then press <Enter>. The available stripe size values range from 4KB
to 128KB. The following are typical values:
•
RAID 0: 128KB
•
RAID 10: 64KB
•
RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
7.
When the Capacity item is selected, enter the RAID volume capacity that you want
and press <Enter>. The default value indicates the maximum allowed capacity.
8.
When the Create Volume item is selected, press <Enter>. The following warning
message appears:
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9.
Press <Y> to create the RAID volume and return to the main menu, or <N> to go back
to the CREATE VOLUME menu.
SABERTOOTH Z170 MARK 1
5-5
- Quick Links:
- Motherboard Layout
- Jumpers
- Onboard Leds
Hide quick links:
Advertisement
Table of Contents
