hit counter script
Asus SABERTOOTH Z170 MARK 1 Instruction Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. SABERTOOTH Z170 MARK 1
  6. Instruction manual

Asus SABERTOOTH Z170 MARK 1 Instruction Manual

Hide thumbs Also See for SABERTOOTH Z170 MARK 1:
Table of Contents

Advertisement

Quick Links

See also: Manual
SABERTOOTH Z170
MARK 1

Advertisement

Table of Contents
loading

Related Manuals for Asus SABERTOOTH Z170 MARK 1

Summary of Contents for Asus SABERTOOTH Z170 MARK 1

  • Page 1 SABERTOOTH Z170 MARK 1...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Safety information ...................... vi About this guide ......................vii SABERTOOTH Z170 MARK 1 specifications summary .......... ix Package contents ..................... xiv Installation tools and components ................xv Chapter 1: Product Introduction Special features..................1-1 1.1.1 Product highlights................ 1-1 1.1.2 “Ultimate COOL”...
  • Page 4 Ai Tweaker menu ..................3-16 Advanced menu ..................3-17 Monitor menu ................... 3-18 Boot menu ....................3-19 Tool menu ....................3-20 3.9.1 ASUS EZ Flash 3 Utility ............3-20 3.9.2 Secure Erase ................3-20 3.9.3 ASUS Overclocking Profile ............3-22 3.9.4 ASUS SPD Information .............
  • Page 5 5.1.3 Setting the RAID item in BIOS ............ 5-2 5.1.4 Intel Rapid Storage Technology Option ROM utility ....5-3 ® Installing the RAID driver during Windows OS installation ....5-7 ® Appendices Notices ........................A-1 ASUS contact information ..................A-5...

  • Page 6: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 7: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 8: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 9: Sabertooth Z170 Mark 1 Specifications Summary

    CPUs. Please refer to Memory QVL (Qualified Vendors List) for details. ** Refer to www.asus.com or this user guide for the complete Memory QVL (Qualified Vendors List). 2 x PCI Express 3.0/2.0 x16 slots (single at x16 or dual at x8/x8 mode) 1 x PCI Express 3.0/2.0 x16 slot* (max.
  • Page 10 - Supports Jack-Detection, Multi-streaming, and Front Panel Jack- Retasking - Optical S/PDIF out port at back I/O Intel Z170 Express Chipset supports ASUS USB 3.1 Boost ® - 6 x USB 3.0/2.0 ports (4 ports @mid-board, 2 port @back panel, blue) - 8 x USB 2.0/1.1 ports (4 ports @mid-board, 4 port @back panel,...
  • Page 11 - USB 3.1 Boost featuring speedy USB 3.1 transmission - USB BIOS Flashback with USB BIOS Flashback Wizard for EZ BIOS download scheduling - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface - Turbo LAN to experience smooth online gaming with lower pings...
  • Page 12 3 x Assistant Fan connectors (1 x 3-pin, 2 x 4-pin [White]) Internal I/O connectors 1 x Front panel audio connector (AAFP) 1 x S/PDIF out header 1 x Thunderbolt header (5-pin) for ASUS ThunderboltEX series support 1 x TPM connector 1 x 24-pin EATX Power connector...
  • Page 13 SABERTOOTH Z170 MARK 1 specifications summary 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.0, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 3, BIOS Features CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control, F3...

  • Page 14: Package Contents

    Package contents Check your motherboard package for the following items: ASUS SABERTOOTH Z170 MARK 1 Technical documentations, Support DVD motherboard certification and warranty card 1 x ASUS SLI™ bridge connector 4 x Serial ATA 6.0 Gb/s cables 1 x ASUS Q-Shield...

  • Page 15: Installation Tools And Components

    Installation tools and components Graphics card (optional) Phillips (cross) screwdriver PC chassis Power supply unit Intel LGA1151 CPU Intel LGA1151 compatible CPU Fan ® ® DIMM SATA hard disk drive SATA optical disc drive (optional) The tools and components in the table above are not included in the motherboard package.

  • Page 17: Chapter 1: Product Introduction

    SATA Express provides faster data transfer speeds of up to 10Gb/s, allowing your system to catch up with the speed of the SSDs. It also features backward compatibility with up to two SATA drives of the same speed. SABERTOOTH Z170 MARK 1...

  • Page 18: Ultimate Cool" Thermal Solutions

    PCIe 3.0 x4 M.2 Support With a 4x PCI Express 3.0/2.0 bandwidth, the M.2 can support up to 32 Gbit/s of data transfer speed. It is a perfect choice for the operating system or application drive, making your system and its installed apps work in a faster pace. Complete USB 3.1 integration This motherboard has the latest USB 3.1 connectivity built in with dual Type-A ports for the very fastest USB data transfers —...

  • Page 19: Tuf Engine" Power Design

    1.1.3 “TUF Engine” Power Design Digital Power Control ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM, DRAM, and CPU Voltage controllers. These controllers offers ultra-precise memory and voltage tuning for optimal system efficiency, stability and performance. TUF Components (Choke, 10K Ti-Cap. & MOSFET; certified by military- standard) The motherboard’s TUF components features military-standard robust TUF new chokes,...

  • Page 20: Asus Ez Diy

    EMI (Electronic Magnetic Interference). ASUS Q-connector ASUS Q-Connector is a unique adapter that allows you to easily connect or disconnect the chassis front panel cables to one module, eliminating the hassle of plugging one cable at a time and making the connection quick and accurate.

  • Page 21: Asus Exclusive Features

    BIOS automatically. AI Suite 3 With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features into one simple-to-use software package. It allows you to supervise fan speed control, voltage and sensor readings. This all-in-one software offers diverse and easy to use functions, with no need to switch back and forth between different utilities.

  • Page 22: Motherboard Overview

    Motherboard overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

  • Page 23: Motherboard Layout

    1.2.2 Motherboard layout Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. SABERTOOTH Z170 MARK 1...

  • Page 24: Layout Contents

    Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 1-31 2. CPU, water pump, CPU optional, assistant fan, extension, and chassis 1-28 fan connectors (4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-6; 4-pin ASST_FAN1-3) 3.

  • Page 25: Central Processing Unit (Cpu)

    Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

  • Page 26: System Memory

    1.2.4 System memory The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations 1-10 Chapter 1: Product Introduction...

  • Page 27: Memory Configurations

    Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. SABERTOOTH Z170 MARK 1 1-11...
  • Page 28 SABERTOOTH Z170 MARK 1 Motherboard Qualified Vendors Lists (QVL) DDR4 3400 (O.C.) MHz capability Vendors Part No. Size SS/DS Chip Chip NO. Timing Voltage DIMM socket Brand support (Optional) CORSAIR CMD16GX4M4B3400C16 16GB(4GB*4) Samsung K4A4G085WD 16-18-18-38 1.35V • DDR4 3333 (O.C.) MHz capability Vendors Part No.
  • Page 29 • • • (Ver5.29) 4GB ) CORSAIR CMD32GX4M4A2800C16 32GB ( 4x 18-18-18-36 • • • (Ver5.29)(XMP) 8GB ) CORSAIR CMK16GX4M4A2800C16 16GB ( 4x 16-16-18-36 • • • (Ver4.23)(XMP) 4GB ) (continued on the next page) SABERTOOTH Z170 MARK 1 1-13...
  • Page 30 DDR4 2800 (O.C.) MHz capability Vendors Part No. Size SS/DS Chip Chip Timing Voltage DIMM socket Brand support (Optional) CORSAIR CMK16GX4M4A2800C16(Ver5.29) 16GB ( 4x 16-18-18-36 • • • 4GB ) CORSAIR CMK32GX4M4A2800C16(Ver5.29) 32GB ( 4x 16-18-18-36 • • • (XMP) 8GB ) G.SKILL F4-2800C15Q2-64GRK(XMP)
  • Page 31 • • • (Ver4.23)(XMP) 8GB ) CORSAIR CMK64GX4M8A2133C13 64GB ( 8x 13-15-15-28 • • • (Ver4.23)(XMP) 8GB ) CORSAIR CMV4GX4M1A2133C15 15-15-15-36 • • • CORSAIR CMV8GX4M1A2133C15 15-15-15-36 • • • (continued on the next page) SABERTOOTH Z170 MARK 1 1-15...
  • Page 32 DDR4 2133 (O.C.) MHz capability Vendors Part No. Size SS/DS Chip Chip NO. Timing Voltage DIMM socket Brand support (Optional) G.SKILL F4-2133C15Q-16GRR 16GB ( 4x 15-15-15-35 • • • 4GB ) G.SKILL F4-2133C15Q-32GRR 32GB ( 4x 15-15-15-35 • • • 8GB ) ISDT IMA41GU6MFR8N-TF0...
  • Page 33 Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. • When you run XMP at DDR4 3200 MHz or higher, system stability depends on the CPU capabilities.

  • Page 34: Expansion Slots

    1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description PCIE 2.0 x1_1 slot PCIE 3.0/2.0 x16_1 slot PCIE 2.0 x1_2 slot PCIE 3.0/2.0 x16_2 slot PCIE 2.0 x1_4 slot PCIE 3.0/2.0 x16_3 slot...

  • Page 35: Irq Assignments For This Motherboard

    PCIe x16_3 shared PCIe x1_1 shared PCIe x1_2 shared PCIe x1_3 shared SMBUS Controller shared Intel SATA Controller shared Intel LAN1(i219) shared Realtek 8111H shared ASMedia SATA shared Controller1 (1061) Intel xHCI shared HD Audio shared SABERTOOTH Z170 MARK 1 1-19...

  • Page 36: Onboard Buttons

    BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. 1-20 Chapter 1: Product Introduction...

  • Page 37: Jumpers

    • Due to chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. SABERTOOTH Z170 MARK 1 1-21...
  • Page 38 CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2.

  • Page 39: Onboard Leds

    ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SABERTOOTH Z170 MARK 1 1-23...

  • Page 40: Internal Connectors

    1.2.9 Internal connectors Intel Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_56 [black]; ® SATAEXPRESS12 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel Rapid Storage Technology through the onboard Intel ®...
  • Page 41 The plugged USB 3.0 device may run on xHCi or EHCl mode depending on the operating system’s setting. • These USB 3.0 ports support native UASP transfer standard in Windows ® Windows 8.1 and Turbo Mode when using USB 3.1 Boost feature. ® SABERTOOTH Z170 MARK 1 1-25...
  • Page 42 Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately.

  • Page 43: Usb 2.0 Connectors

    DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 44 CPU, water pump, CPU optional, assistant fan, extension, and chassis fan connectors (4-pin CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-6; 4-pin ASST_FAN1-3) Connect the fan cables to the fan connectors on the motherboard. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
  • Page 45 • If you want to connect a high-definition or an AC 97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio] or [AC97]. SABERTOOTH Z170 MARK 1 1-29...
  • Page 46 Thermal Sensor connectors (2-pin T_SENSOR1; T_SENSOR2; T_SENSOR3) These connectors are for the thermistor cables that monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermistor cable and place the sensor on the device or the motherboard’s component to detect its temperature.
  • Page 47 • If you want to use two or more high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. SABERTOOTH Z170 MARK 1 1-31...

  • Page 48: System Panel Connector

    System panel connector (20-3 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin or 3-1 pin PLED) The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 49 Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. SABERTOOTH Z170 MARK 1 1-33...
  • Page 50 Thunderbolt header (5-pin TB_HEADER) This connector is for the add-on Thunderbolt I/O card that supports Intel ’s Thunderbolt ® Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately. 1-34 Chapter 1: Product Introduction...
  • Page 51 This socket allows you to install an M.2 (NGFF) SSD module. • This socket supports M Key and type 2242/2260/2280 storage devices. • The M.2 Socket 3 shares bandwidth with PCIe x16_3 slot. The M.2 (NGFF) SSD module is purchased separately. SABERTOOTH Z170 MARK 1 1-35...
  • Page 52 ASMedia Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12) ® These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. • ASMedia storage controller can only support AHCI mode. • These SATA ports are for data drives only. 1-36 Chapter 1: Product Introduction...

  • Page 53: Chapter 2: Basic Installation

    The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. Install the ASUS Q-Shield to the chassis rear I/O panel. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’...
  • Page 54 Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT over tighten the screws! Doing so can damage the motherboard. Chapter 2: Basic Installation...

  • Page 55: Cpu Installation

    Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket. Top of CPU Bottom of CPU Bottom of CPU SABERTOOTH Z170 MARK 1...
  • Page 56 Top of CPU • Ensure that the CPU is firmly clicked into place before installing it onto the CPU socket on the motherboard. • Use the CPU Installation Tool for installing the CPU only. DO NOT damage or bend the CPU Installation Tool. • Always firmly hold both sides of the CPU Installation Tool when installing, removing, or picking up the CPU Installation Tool. • ASUS will not cover damages resulting from incorrect CPU installation/removal, incorrect CPU orientation/placement, or other damages resulting from negligence by the user. Chapter 2: Basic Installation...

  • Page 57: Cpu Heatsink And Fan Assembly Installation

    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly SABERTOOTH Z170 MARK 1...
  • Page 58 To uninstall the CPU heatsink and fan assembly Chapter 2: Basic Installation...

  • Page 59: Dimm Installation

    2.1.4 DIMM installation To remove a DIMM SABERTOOTH Z170 MARK 1...

  • Page 60: Atx Power Connection

    2.1.5 ATX Power connection Chapter 2: Basic Installation...

  • Page 61: Sata Device Connection

    2.1.6 SATA device connection SABERTOOTH Z170 MARK 1...

  • Page 62: Front I/O Connector

    2.1.7 Front I/O Connector To install ASUS Q-Connector To install USB 2.0 connector To install front panel audio connector AAFP USB 2.0 To install USB 3.0 connector USB 3.0 Chapter 2: Basic Installation 2-10...

  • Page 63: Expansion Card Installation

    2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards SABERTOOTH Z170 MARK 1 2-11...

  • Page 64: Bios Update Utility

    BIOS Flashback is not operating properly. This may be caused by improper installation of the USB storage device and filename/file format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. Chapter 2: Basic Installation 2-12...

  • Page 65: Motherboard Rear And Audio Connections

    USB 3.1 port EA1 (supports USB 3.1 Intel LAN port* Boost) Realtek LAN port* Optical S/PDIF Out port USB BIOS Flashback button Audio I/O ports** *and **: Refer to the tables on the next page for LAN port LEDs, and audio port definitions. SABERTOOTH Z170 MARK 1 2-13...
  • Page 66 • USB 3.1/3.0 devices can only be used as data storage only. • We strongly recommend that you connect your devices to ports with matching data transfer rate. Please connect your USB 3.0 devices to USB 3.0 ports and your USB 3.1 devices to USB 3.1 ports for faster and better performance for your devices. • All USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. * LAN ports LED indications Activity Link LED Speed LED Status...

  • Page 67: Audio I/O Connections

    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers SABERTOOTH Z170 MARK 1 2-15...
  • Page 68 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers Chapter 2: Basic Installation 2-16...

  • Page 69: Starting Up For The First Time

    While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. SABERTOOTH Z170 MARK 1 2-17...
  • Page 70 Chapter 2: Basic Installation 2-18...

  • Page 71: Chapter 3: Bios Setup

    BIOS Setup Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

  • Page 72: Bios Setup Program

    BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>, POST continues with its routines.

  • Page 73: Ez Mode

    Click to go to Advanced mode Loads optimized Search on the FAQ default settings Click to display boot devices Selects the boot device priority The boot device options vary depending on the devices you installed to the system. SABERTOOTH Z170 MARK 1...

  • Page 74: Advanced Mode

    3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode or press <F7> hotkey. Configuration fields Quick Note (F9) Scroll bar...

  • Page 75: Menu Bar

    This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard’s SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. SABERTOOTH Z170 MARK 1...

  • Page 76: Hot Keys

    Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code:...

  • Page 77: Q-Fan Control

    Click to activate DC Mode configured PWM Mode Select a profile to Click to apply the fan setting apply to your fans Click to go back to main menu Click to undo the changes Select to manually configure your fans SABERTOOTH Z170 MARK 1...
  • Page 78 Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Select the fan that you want to configure and to view its current status. Click and drag the speed points to adjust the fans’...

  • Page 79: Ez Tuning Wizard

    To start OC Tuning: Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. Click OC then click Next. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next. SABERTOOTH Z170 MARK 1...

  • Page 80: Creating Raid

    Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning. Creating RAID To create RAID: Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen.
  • Page 81 After selecting the type of RAID, click Next then click Yes to continue the RAID setup. After the RAID setup is done, click Yes to exit the setup then click OK to reset your system. SABERTOOTH Z170 MARK 1 3-11...

  • Page 82: My Favorites

    My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items. Chapter 3: BIOS Setup 3-12...
  • Page 83 Configuration items such as Memory SPD Information, system time and date. Click Exit (ESC) or press <Esc> key to close Setup Tree Map screen. Go to My Favorites menu to view the saved BIOS items. SABERTOOTH Z170 MARK 1 3-13...

  • Page 84: Main Menu

    Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings.

  • Page 85: Administrator Password

    [Installed.] To set a user password: Select the User Password item and press <Enter>. From the Create New Password box, key in a password, then press <Enter>. Confirm the password when prompted. SABERTOOTH Z170 MARK 1 3-15...

  • Page 86: Ai Tweaker Menu

    To change a user password: Select the User Password item and press <Enter>. From the Enter Current Password box, key in the current password, then press <Enter>. From the Create New Password box, key in a new password, then press <Enter>. Confirm the password when prompted.

  • Page 87: Advanced Menu

    The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. SABERTOOTH Z170 MARK 1 3-17...

  • Page 88: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. Chapter 3: BIOS Setup 3-18...

  • Page 89: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options and boot device priority. SABERTOOTH Z170 MARK 1 3-19...

  • Page 90: Tool Menu

    To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may become unstable if you run Secure Erase on an incompatible SSD.
  • Page 91 Locked. SSDs might be locked if the Secure Erase process is either incomplete • or was stopped. This may be due to a third party software that uses a different password defined by ASUS. You have to unlock the SSD in the software before proceeding with Secure Erase. SABERTOOTH Z170 MARK 1...

  • Page 92: Asus Overclocking Profile

    3.9.3 ASUS Overclocking Profile This item allows you to store or load multiple BIOS settings. Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press <Enter>, and then select Yes.

  • Page 93: Asus Spd Information

    3.9.4 ASUS SPD Information This item allows you to view the DRAM SPD information. SABERTOOTH Z170 MARK 1 3-23...

  • Page 94: Exit Menu

    3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.

  • Page 95: Updating Bios

    ® ASUS EZ Flash 3: Updates the BIOS using a USB flash drive. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a USB flash drive when the BIOS file fails or gets corrupted. ASUS BIOS Updater: Updates the BIOS in DOS environment using the motherboard support DVD and a USB flash disk drive.

  • Page 96: Asus Ez Flash 3

    3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS-based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet.
  • Page 97 To update the BIOS by Internet: Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press <Enter>. Select by Internet. Press the Left/Right arrow keys to select an Internet connection method, and then press <Enter>.

  • Page 98: Asus Crashfree Bios 3

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.

  • Page 99: Chapter 4: Software Support

    8.1 operating systems (OS). ® • Motherboard settings and hardware options vary. The setup procedures presented in this chapter are for reference only. Refer to Windows operating system ® documentation for detailed information. Support DVD information The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website at www.asus.com for updates. 4.2.1 Running the support DVD Ensure that you have an Administrator account before running the support DVD in Windows 7, Windows 8, or Windows 8.1 operating systems. ® ® ® To run the support DVD: Place the Support DVD into the optical drive. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. SABERTOOTH Z170 MARK 1...

  • Page 100: Obtaining The Software Manuals

    Click an item to open the folder of the user guide Click to display product related information Click to display the ASUS contact information Click to browse the file list of the suport CD Click to install the selected items 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get...

  • Page 101: Software Information

    Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. AI Suite 3 AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and allows you to launch and operate these utilities simultaneously. Installing AI Suite 3 Ensure that you have an Administrator account before installing AI Suite 3 in Windows 7, ® Windows 8, or Windows 8.1 operating systems. ® ® To install AI Suite 3 on your computer: Windows 7 OS ® Place the Support DVD into the optical drive. 2. In the AutoPlay dialog box, click or tap Run ASSETUP.exe then select the Utilities tab. 3. From the Utilities tab, click or tap AI Suite 3 then follow the succeeding onscreen instructions. SABERTOOTH Z170 MARK 1...
  • Page 102 Go to the Start Screen then click or tap the Desktop app. On the lower left corner of the Desktop, click or tap File Explorer then select your DVD drive and tap or double-click or tap the Setup application. Launching AI Suite 3 Windows ® 7 OS From the Desktop, click or tap Start > All Programs > ASUS > AI Suite 3 > AI Suite 3. You can also launch AI Suite in Windows 7 by clicking or tapping on the Notification ® area. Windows 8 and Windows 8.1 OS ®...
  • Page 103 AI Suite 3 Main menu The AI Suite 3 main menu gives you easy-access controls and insight to what’s going on with your computer - allowing you to optimize performance settings while at the same time ensuring system stability. The AI Suite main menu includes is a quick-access menu bar that allows you to swiftly launch any of the integrated ASUS utilities. Click on the left of the menu to launch the menu bar. The AI Suite 3 screenshots in this section are for reference only and can vary depending on motherboard model. Click to launch AI Suite 3 menu bar AI Suite 3 main menu bar • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. SABERTOOTH Z170 MARK 1...
  • Page 104 Thermal Radar 2 Thermal Radar 2 lets you control fans, monitor your graphics card temperature and other key components in real time, or auto-tune your thermal settings. Thermal Tuning This function optimizes your system’s cooling solution based on your system’s current thermal settings. It allows you to configure your CPU, chassis, and the exclusive TUF Turbo fan to achieve the best balance between cooling performance and low noise. Click or tap to automatically start the Thermal Tuning process Thermal Status Displays the current status of the thermal condition of your system. Click or tap to run the assessment report of your current thermal settings. Chapter 4: Software Support...

  • Page 105: Fan Control

    Fan Control Allows you to configure the settings of the fans installed on your system. You can also load or save a fan’s profile to tune the thermal condition of your system. Click or tap to load saved profiles Click or tap to switch between items Click or tap to save the settings of the new profile Fan Overtime settings Dust de-Fan settings SABERTOOTH Z170 MARK 1...
  • Page 106 DIGI+ Power Control ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM and DRAM Voltage controllers. These controllers offers ultra-precise memory and voltage tuning for optimal system efficiency, stability and performance. Click or tap to go the CPU configurations screen Click or tap to go the DRAM configurations screen DIGI+PowerControl - CPU Click or tap to go back Click or tap to switch Click or tap to undo...
  • Page 107 Click or tap to go back the changes the changes to the previous screen DIGI+PowerControl - GPU Click or tap to apply Click or tap to go back Click or tap to undo the changes to the previous screen the changes SABERTOOTH Z170 MARK 1...

  • Page 108: Ai Charger

    4.4.1 Ai Charger+ Ai Charger+ allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. Launching Ai Charger+ To launch Ai Charger+, click on the left of the AI Suite 3 main menu, then select Ai Charger+. Ai Charger+ is available only in selected motherboard models. Ai Charger+ screen Tick to enable or Click or tap to apply disable Ai Charger+ the selection • * Check the manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may vary depending on the charging rate and specifications of your USB device. • To ensure normal charging function, disconnect and reconnect your USB device every time you enable or disable Ai Charger+. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables.

  • Page 109: Ez Update

    Click or tap to automatically update your motherboard driver, software and firmware Click or tap to search and Click or tap to Click or tap to select a select the BIOS file update the BIOS boot logo SABERTOOTH Z170 MARK 1 4-11...
  • Page 110 Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to Click or tap to proceed the updating EZ Update main screen BIOS and boot logo After you click or tap BIOS Update button, click or tap Flash to update the BIOS and upload the boot logo in your system.

  • Page 111: Usb Bios Flashback

    Click or tap to cancel the download schedule setting Click or tap to apply the download schedule setting Click or tap to check for a new BIOS update available for download Scheduling the BIOS download In the Download Setting field, tick Schedule (days) then select the number of days for the BIOS download schedule. Click or tap Apply to save the BIOS download schedule. Click or tap Cancel to cancel the download schedule. SABERTOOTH Z170 MARK 1 4-13...
  • Page 112 Downloading the latest BIOS Before you start downloading, ensure that you have installed the USB storage device to your computer’s USB port that supports USB BIOS Flashback. Refer to section 2.3.1 Rear I/O connection of this user guide for more details. To download the updated BIOS: From the USB BIOS Flashback screen, click or tap Check for New BIOS Update. Wait for the system to check the latest BIOS version. After the utility detects a new BIOS, click or tap from the Save to: field, select the USB flash drive, then click or tap Download. SABERTOOTH Z170 MARK 1 After the download is complete, click or tap OK. Chapter 4: Software Support 4-14...

  • Page 113: Push Notice

    Click or tap to Click or tap to apply the settings discard the settings You can also enable the Push Notice via the Push Notice shortcut on the lower-right corner of your screen. To do this, click or tap << then click or tap then select Pairing your computer and smart device To pair your computer and smart device: On your smart device, tap to launch Push Notice. Push Notice Tap Push Scan then tap the name of your computer that you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. SABERTOOTH Z170 MARK 1 4-15...
  • Page 114 Setting up PC Mode alerts of your computer This feature allows you to restart, shut down, or put your computer to sleep mode and sends an alert to your smart device. Tick these to enable mode alerts Tick to select the smart device Set the day and time to enable the PC modes Set the minutes to send the alert before the PC mode/s activation Key in your messages for more information...
  • Page 115 Viewing your computer status on your smart device Tap on your smart device to launch Push Notice. Push Notice Tap to delete PC Tap to view PC alerts mode alerts Tap to view PC status alerts Tap to view PC sent messages Tap to scan more host computers SABERTOOTH Z170 MARK 1 4-17...

  • Page 116: Usb 3.1 Boost

    4.4.5 USB 3.1 Boost USB 3.1 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically speeds up the transfer rates of your USB storage devices. Launching USB 3.1 Boost To launch USB 3.1 Boost, cclick on the left of the AI Suite 3 main menu, then select USB 3.1 Boost. Using the USB 3.1 Boost Click or tap to enable the USB device’s normal data transfer rate Click or tap to enable UASP or Turbo Mode for a faster data Click or tap to select a USB device transfer rate Ensure to connect your USB 3.1/3.0 device to the USB 3.1/3.0 ports that support USB 3.1...

  • Page 117: System Information

    4.4.6 System Information This utility allows you get the detailed information of the motherboard, CPU, and memory settings. Launching the System Information To launch System Information, click on the left of the AI Suite 3 main menu, then select System Information. Viewing the motherboard information Click or tap the MB tab to view the motherboard’s information. Viewing the CPU information Click or tap the CPU tab to view the processor’s information. SABERTOOTH Z170 MARK 1 4-19...

  • Page 118: Mobo Connect

    Viewing the SPD information Click or tap the SPD tab to view the memory’s information. 4.4.7 Mobo Connect Mobo Connect allows you to share the PC’s keyboard/mouse for smart devices, or stream audio playback from your smart device yo the PC. Launching Mobo Connect To launch Mobo Connect, click on the left of the AI Suite 3 main menu, then select Mobo Connect. Chapter 4: Software Support 4-20...

  • Page 119: Version

    4.4.8 Version Displays the installed software or utilities and their current version. SABERTOOTH Z170 MARK 1 4-21...

  • Page 120: Turbo Lan

    Turbo LAN Turbo LAN is a network traffic shaping technology that lowers lag and helps reduce delays during data transfers or when playing online games. It allows you to set programs or application’s network priorities to currently running games or applications. Turbo LAN features an intuitive user interface and an Advance Mode that tweakers can use to configure hardcore controls or settings. To launch Turbo LAN, click or tap the on the desktop. Displays the Network Adapter Displays the current connection information and bandwidth usage status Adjust the slider to set a program or application’s priority Click to delete an application or program on the list Click to view the programs Click to open Click to open an item...

  • Page 121: Tuf Detective

    On your mobile device, download and Detective in your mobile phone. install the TUF Detective app. Download the TUF Detective app from Play Store or use the QR code to find the app. Launch the TUF Detective app to remotely control and manage your computer. Scan the QR code to find the app. 4.6.1 Post The Post page provides the POST (Power-On Self Test) status.. Code for the POST status Details about the POST status. Post SABERTOOTH Z170 MARK 1 4-23...

  • Page 122: Control

    4.6.2 Control The Control page allows you to Tap the POWER button and remotely control the functions select Yes to power your of your computer. computer on or off. Control Tap the RESTART button Tap FORCE SHUTDOWN to and select Yes to restart your force the system to shutdown computer. without saving data. Chapter 4: Software Support 4-24...

  • Page 123: Monitor

    Tap CLEAR CMOS and select Tap PATCH ERROR and Yes to clear the CMOS RTC select Yes to automatically RAM data. repair your computer. 4.6.3 Monitor The Monitor page allows Tap the triangle icon to monitor you to monitor voltage, the voltage. temperature, and fan speed. Monitor SABERTOOTH Z170 MARK 1 4-25...

  • Page 124: Information

    Tap the triangle icon to monitor Tap the triangle icon to monitor the temperature. the fan speed. 4.6.4 Information The Information page provides you with important details about the system such as the model name, BIOS version, product number, operating time, CPU information, and DRAM information. Information Chapter 4: Software Support 4-26...

  • Page 125: Audio Configurations

    ® Audio Manager. Realtek HD Audio Manager ® Realtek HD Audio Manager ® Configuration option tabs (vary with the audio devices connected) Advanced settings Set default device button Control settings panel Analog and digital connector status SABERTOOTH Z170 MARK 1 4-27...
  • Page 126 Selecting an audio output Realtek HD Audio Manager allows you to select the type of audio output depending on the output device that you are using. To select an audio output: Insert the audio device’s jack to the Line Out (lime) port. If the audio device’s jack is already inserted to the corresponding port, click or tap on the Realtek HD Audio Manager. On the pop-up window, tick the audio device that you plugged to the Line Out port then click or tap Next. If you select Headphone, click or tap to select the type of headphone installed then click or tap OK. If you select Front Speaker Out, click or tap to select the type of speaker installed then click or tap OK. Chapter 4: Software Support 4-28...

  • Page 127: Chapter 5: Raid Configurations

    With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. SABERTOOTH Z170 MARK 1...

  • Page 128: Installing Serial Ata Hard Disks

    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: Install the SATA hard disks into the drive bays.

  • Page 129: Intel ® Rapid Storage Technology Option Rom Utility

    The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. SABERTOOTH Z170 MARK 1...
  • Page 130 Creating a RAID set To create a RAID set: From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0...
  • Page 131 WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. SABERTOOTH Z170 MARK 1...
  • Page 132 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: [ DELETE VOLUME MENU ] Name...

  • Page 133: Installing The Raid Driver During Windows ® Os Installation

    RAID driver from the support DVD to the USB flash drive. To set up a Windows UEFI operating system under RAID mode, ensure to load the UEFI ® driver for your optical drive. SABERTOOTH Z170 MARK 1...
  • Page 134 Chapter 5: RAID Configurations...

  • Page 135: Appendices

    Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. SABERTOOTH Z170 MARK 1...

  • Page 136: Canadian Department Of Communications Statement

    IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 137 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 138 Slovenščina AsusTek Inc. tukaj izjavlja, da je ta naprava skladna s di conformità CE. temeljnimi zahtevami in drugimi relevantnimi določili direktiv CE. Za več Компания ASUS заявляет, что это устройство соответствует основным informacij glejte Izjavo CE o skladnosti. требованиям и другим соответствующим условиям европейских...

  • Page 139: Asus Contact Information

    +1-510-739-3777 +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support http://www.service.asus.com/ ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-1805-010923 Support Fax...
  • Page 140 Appendices...

Table of Contents