Table of Contents
Advertisement
10.
Intel
P67 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4 [blue])
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 0+1(10)
configurations with the Intel
chipset.
P8P67-M Intel
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
ASUS P8P67-M
Rapid Storage Technology through the onboard Intel
®
P8P67-M
SATA 3.0 Gb/s connectors
®
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
See section 2.5.5 SATA Configuration for details.
folder named Manual in the support DVD.
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows
See section 2.5.5 SATA Configuration for details.
SATA3G_2
SATA3G_1
SATA3G_4
SATA3G_3
XP Service Pack 2 or later version before using Serial ATA
®
XP SP2 or later version.
®
P67
®
1-30
Hide quick links:
Advertisement
Table of Contents
