Removing Propeller; Installing Propeller - Yamaha F50F Owner's Manual
Hide thumbs
Also See for F50F:
- Service manual (305 pages) ,
- Owner's manual (110 pages) ,
- Owner's manual (94 pages)
Table of Contents
Advertisement
tion, or other damage.
Check the propeller shaft for damage.
●
Check the splines for wear or damage.
●
Check for fish line tangled around the pro-
●
peller shaft.
Check the propeller shaft oil seal for dam-
●
age.
EMU30661
Removing propeller
EMU29197
Spline models
1.
Straighten the cotter pin and pull it out
using a pair of pliers.
2.
Remove the propeller nut, washer, and
spacer (if equipped). WARNING! Do
not use your hand to hold the propel-
ler when loosening the propeller nut.
[EWM01890]
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
3.
Remove
the
equipped), and thrust washer.
EMU30671
Installing propeller
EMU29233
Spline models
ECM00500
NOTICE
Be sure to use a new cotter pin and bend
the ends over securely. Otherwise the
propeller could come off during opera-
tion and be lost.
1.
Apply Yamaha marine grease or a cor-
rosion resistant grease to the propeller
shaft.
2.
Install the spacer (if equipped), thrust
washer, washer (if equipped), and pro-
peller on the propeller shaft. NOTICE:
Be sure to install the thrust washer
before installing the propeller, other-
wise the lower case and propeller
boss could be damaged.
Maintenance
1
3
6
4
5
ZMU03228
propeller,
washer
[ECM01880]
2
(if
75
Advertisement
Table of Contents
