Checking The Ink Volume; Machine Information; Checking The Serial Number; Packing And Shipping The Machine - Brother MFC-3360C User Manual
Hide thumbs
Also See for MFC-3360C:
- Software user's manual (155 pages) ,
- User manual (140 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
Checking the ink volume
You can check the ink that is left in the
cartridge.
a
Press Ink Management.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
Ink Volume
BK:-nnnonnn+ e
c
Press a or b to choose the colour you
want to check.
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh
Software User's Guide on the CD-ROM.)
Machine Information
Checking the serial number
You can see the machine's serial number on
the LCD.
a
Press Menu, 5, 1.
1.Serial No.
b
Press OK.
XXXXXXXXX
c
Press Stop/Exit.
92
B
e
®
or
®
in the
B
B
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
It is important to allow the machine to 'park'
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
Open the ink cartridge cover.
b
Pull the lock release levers down and
take out all the ink cartridges.
c
Install the yellow protective part, lift each
lock release lever and push it until it
clicks, and then close the ink cartridge
cover.
B
Advertisement
Table of Contents
