hit counter script
Canon WUX6010 User Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. WUX6010
  6. User manual

Canon WUX6010 User Manual

Multimedia
Hide thumbs
Table of Contents

Advertisement

Quick Links

MULTIMEDIA PROJECTOR
User's Manual
Safety Instructions
Before Use
Installation Procedure
Connection Procedure
Projection Procedure
Convenient Features
Using Menus
Menu Description
Advanced Projection
Maintenance
Product Specifications
Troubleshooting
ENG

Advertisement

Table of Contents
loading

Related Manuals for Canon WUX6010

Summary of Contents for Canon WUX6010

  • Page 1 Safety Instructions MULTIMEDIA PROJECTOR Before Use Installation Procedure User’s Manual Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting...

  • Page 2: How To Use This Manual

    This Manual This is the user’s manual for WUX6010 Multimedia Projectors. The “Basic Guide” section describes installation and basic use of the projector. Descriptions of menus and how to connect the projector to a network are given in the “Advanced Guide”...

  • Page 3: Table Of Contents

    Table of Contents How to Use This Manual....2 Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen....63 Safety Instructions......5 Step 5 Adjusting Keystone Safety Precautions......... 6 Distortion ..........67 CAUTION ON HANGING FROM THE Step 6 Select the Image Quality (Image CEILING ..........
  • Page 4 Table of Contents Installing / Removing the Lens Unit ............170 Product Specifications ..... 175 Relationship between Aspect and Screen Aspect ........175 Displayed Test Patterns ....179 Supported Signal Types....180 Troubleshooting......190 LED Indicator Details......190 Symptoms and Solutions....191 Index...........

  • Page 5: Safety Instructions

    If your projector does not seem to be operating properly, read this manual again, check operations and cable connections, and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK...

  • Page 6: Safety Precautions

    Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result.
  • Page 7 Safety Instructions ■ READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning.
  • Page 8 If you are not sure of the type of power supplied, contact the Canon Customer Support Center or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

  • Page 9: Ac Power Cord Requirement

    MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, MUNICIPAL, STATE, PROVINCIAL, OR FEDERAL LAWS. For lamp recycling and disposal information please call 1-800-OK-CANON for the U.S. and Canada. Only for European Union and EEA (Norway, Iceland and...

  • Page 10: Federal Communication Commission Notice

    Safety Instructions Federal Communication Commission Notice Model: WUX6010 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
  • Page 11 Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or serious injury from improper handling if the information is not observed.

  • Page 12: Precautions For Use

    If the following situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock.

  • Page 13: Installation And Handling Precautions

    Safety Instructions Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so may cause a fire, electric shock or personal injury. • Do not use any power source with a voltage other than the voltage indicated (AC 100–240 V).

  • Page 14: Precautions On The Lamp

    • Do not remove the cabinet from the projector or disassemble it. The interior of the projector contains high-voltage components as well as parts that are hot. If inspection, maintenance or repair is required, contact the Canon Customer Support Center.

  • Page 15: Precautions For The Batteries Of The Remote Control

    • Before replacing the lamp, always unplug the projector and wait at least an hour. • Ruptured lamps may scatter shards of glass inside the projector. Contact the Canon Customer Support Center for cleaning and inspection of the projector interior and lamp replacement. Precautions when replacing lamps that stop working •...
  • Page 16 Safety Instructions Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of time, be sure to remove the power plug from the power outlet to ensure safety. Failure to do so presents a risk of fire if dust accumulates on the plug or outlet.

  • Page 17: For Safe Use

    • Removal and installation of the lens unit should not be performed by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. • Disconnect the cables connected to the projector. Carrying the projector while the cables are attached may cause an accident.
  • Page 18 For Safe Use • Install the projector with sufficient space between air intakes and exhaust vents and walls. Failure to do so could cause a malfunction. • Do not install the projector in a location that is damp, or where there is a lot of dust, oily smoke or tobacco smoke.

  • Page 19: Before Installation

    Before Installation Precautions When Carrying/Shipping the Projector Prepare the projector as described below before carrying it. • Disconnect the cables connected to the projector. Carrying the projector with the cables attached may cause an accident. • Retract the adjustable feet before moving the projector. Leaving the feet extended may cause damage.
  • Page 20 Before Installation ■ Do Not Touch the Lens with Bare Hands Do not touch the lens with bare hands. Doing so may adversely affect picture quality. ■ Allow a 30 Min. Warm Up before Focus Adjustment (P59), if Possible The focus position may not stabilize immediately after startup, due to lamp heat. When adjusting focus, it is also helpful to use the test pattern (10) (P106, P179).

  • Page 21: When Using Mounted On The Ceiling

    Before Installation ■ When Using Mounted on the Ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. Dust that accumulates in intake or exhaust vents may impair ventilation, raising the temperature inside and posing a risk of damage or fire.

  • Page 22: Install Facing In The Correct Direction

    [Vertical projection] (P99) in the [Install settings] menu. • Do not attempt to install the projector for upward or downward projection by yourself. Always request installation by a qualified technician or the Canon Customer Support Center. 10° 10° 10° 10° Upward...

  • Page 23: Copyright Notice

    Ensure Network Security Take measures to ensure network security. Note that Canon is not liable in any way for direct or indirect loss from network security incidents, such as unauthorized access.

  • Page 24: Open Source Software

    HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO SUPPORT Canon Inc., and all its subsidiaries or its dealers do not make any support service regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall not respond to any questions or enquiries, from you or any other customers, regarding the source code.

  • Page 25: Before Use

    Before Use Projector Highlights High-Resolution LCOS Projection Projection at 1920x1200 (WUXGA), thanks to high-resolution reflective liquid crystal on silicon (LCOS) panels. HDBaseT Input The projector supports HDBaseT, a next-generation connectivity standard. HDBaseT offers a convenient connection for carrying high-quality video and audio signals equivalent to HDMI across distances up to 100 m over a single LAN cable.
  • Page 26 Before Use Split-Screen Display Splits the screen for projection of two separate input signals at once. (P153) Edge Blending Blend the overlapping edges of images from multiple projectors to make the overall image more seamless. (P154) Networked Multi-Projection (NMPJ) Project images from multiple computers via a network connection. For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user’s manual.

  • Page 27: Included Accessories

    Before Use Included Accessories Before use, make sure the following items are included in the package. • Remote control • Batteries for the remote control (AAA size x2) (part No.: RS-RC04) Optional remote controls are also available (RS-RC05). The RS-RC05 can also be used as a wired remote.

  • Page 28: Part Names

    Before Use Part Names Projector Power cord connector (P52) Side control (P29) Lens unit (sold separately) Air intake vent Do not block the air intake. Infrared remote receiver Doing so may cause a (P37) Terminals and malfunction. connectors Air filter frame (P164) Anti-theft lock hole An anti-theft wire cable (not included) can be connected.

  • Page 29: Side Control

    Before Use ■ Bottom Side Bolt holes for installation of ceiling attachment Adjustable feet (P40) Side Control (1) POWER button (P53, P71) (4) INPUT button (P56) Turns the projector on or off. Switches the input signal. (2) MENU button (P78) (5) Pointer / VOL buttons (P79) Displays a menu on the screen.

  • Page 30: Led Indicators

    Before Use LED Indicators The projector status is shown by the LED indicators (off / lit / flashing). • POWER ON (green) : Lights up or flashes under normal conditions when the power is on. • STAND BY (red) : Lights up or flashes during standby or when the projector is shut down.

  • Page 31: Led Indicator Displays

    Before Use ■ LED Indicator Displays The LED indicators flash or illuminate to indicate the operating status of the projector. Legend: Example of when the POWER ON indicator is on; : Off : Lit : Flashing LED indicator POWER STAND Operating status WARNING LAMP...

  • Page 32: Input Terminal

    Before Use Input Terminal (10) (1) Terminal for wired remote control (REMOTE) (P37) This terminal is used to connect the optional remote control (RS-RC05) using a cable. (2) AUDIO IN terminal (AUDIO IN) (P49, P50, P51) Terminals for audio input. Audio supplied to these terminals is played through the internal speaker when you select [Audio in] as the source audio terminal for the selected source video.
  • Page 33 Before Use (10) Service port (CONTROL) (P187) Used to control the projector with user commands (P188 – P189).

  • Page 34: Remote Control

    Before Use Remote Control The projector can be operated using buttons on the remote control or the side control on the projector. The remote control allows you to operate all functions of the projector. (3) ASPECT button (P65, P82) Changes the aspect ratio mode. (4) D.SHIFT/KEYSTONE button (P67) Corrects keystone distortion.
  • Page 35 Before Use (12) OK button (P79) Determines the item selected from the menu. (13) Pointer buttons (P79) Selects the upper, lower, left or right item in the menu. Also used to assign a channel to the remote control. (10) (14) MENU button (P78) (11) Displays a menu on the screen.

  • Page 36: Preparing The Remote Control

    Before Use Preparing the Remote Control ■ Installing Remote Control Batteries Open the battery Insert batteries. Close the compartment lid. Insert 2 new AAA compartment lid. Slide the lid while batteries in the Slide the lid until you pressing it down. compartment with the hear a click to + and –...

  • Page 37: Remote Control Operating Range

    Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 8 m (26.3') 25° 8 m (26.3') 25°...

  • Page 39: Basic Guide

    Safety Instructions Before Use Basic Guide Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting...

  • Page 40: Installation Procedure

    Installation Procedure Before setting up the projector, be sure to read “Before Installation” (P19). Setting Up the Projector ■ Positioning the Projector in Front of the Screen Place the projector in front of the screen. • To avoid keystone distortion, install the Screen projector so that it is at right angles to the screen.

  • Page 41: Ceiling Mounting Or Rear Projection

    Installation Procedure ■ Installation on High Surfaces For projection from a shelf or other high surface, the projector can be installed upside-down and the projected image inverted. When setting the projector on a high surface for projection, be sure the surface is flat and stable. Failure to do so poses a risk of the projector falling and causing accidents or injury.
  • Page 42 Depending on the installation environment, an extension pipe (part No.: RS-CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional ceiling attachment.

  • Page 43: Relationship Between Image Size And Projecting Distance

    • Standard Zoom Lens / Long Zoom Lens / Ultra Long Zoom Lens / Wide Zoom Lens: +50% (up / down), 0% (left / right) Short Fixed Lens: 0% (up / down / left / right) WUX6010 Projection Distance from...
  • Page 44 Installation Procedure Projection Distance from optical axis Image size (cm) distance Diagonal when projection m (feet) is perpendicular Lens unit when 16:10 16:9 16:10 to screen (cm) 16:10 Wide Tele Width Height Width Height Width Height limit limit (6.2) (10.5) (9.2) (15.7) (12.5)
  • Page 45 Installation Procedure Projection Distance from optical axis Image size (cm) distance Diagonal when projection m (feet) is perpendicular Lens unit when 16:10 16:9 16:10 to screen (cm) 16:10 Wide Tele Width Height Width Height Width Height limit limit (15.1) (29.5) 12.0 (20.0) (39.4)
  • Page 46 Installation Procedure Projection Distance from optical axis Image size (cm) distance Diagonal when projection m (feet) is perpendicular Lens unit when 16:10 16:9 16:10 to screen (cm) 16:10 Wide Tele Width Height Width Height Width Height limit limit (3.0) (4.3) (4.3) (6.2) (5.6)

  • Page 47: Lens Shift Function

    “Adjusting the Image Position” (P61). The amount of lens shift is indicated as a percentage relative to the image height and width. The table below shows the lens shift for each lens. Lens unit WUX6010 Standard Zoom Lens (RS-IL01ST) Long Zoom Lens Up (1):...
  • Page 48 Installation Procedure Area Outside the Lens Shift Range With the Standard Zoom Lens, Long Zoom Lens, Ultra Long Zoom Lens, and Wide Zoom Lens, when the shift exceeds 44% in the upward direction, the amount of available shift in the left / right directions decreases. When the lens is shifted upward to the maximum (1), the amount of available shift in the left / right direction is ±2%.

  • Page 49: Connection Procedure

    Connection Procedure Before connecting the projector to other equipment, turn off both the projector and the other equipment. Connecting a Computer Amplified speakers Mini jack RCA terminal Audio cable Audio cable (not included) (not included) AUDIO OUT terminal AUDIO IN 1 terminal DVI-I terminal DVI-D-sub 15 cable...
  • Page 50 Connection Procedure Connecting a Computer (continued) Computer Monitor output terminal AUDIO output (Mini D-sub 15-pin) terminal BNC cable Computer cable Audio cable (not included) (not included) (not included) Mini D-sub 15-pin - BNC terminal converter cable (not included) HDBaseT terminal AUDIO IN 2 terminal HDMI terminal...

  • Page 51: Connecting Av Equipment

    Connection Procedure Connecting AV Equipment Amplified AV equipment speakers RCA component Mini jack terminal Mini jack terminal D terminal terminal D terminal RCA plug - plug - RCA RCA plug Audio Audio plug component cable cable component cable (not (not (not conversion included)

  • Page 52: Plugging The Projector In

    Connection Procedure Notes on HDBaseT • Use a shielded cable rated at CAT5e or better. • Maximum transmission distance is 100 m. • However, maximum transmission distance may be shorter in some environments. • Do not use the LAN cable when it is coiled or bundled. •...

  • Page 53: Projection Procedure

    Projection Procedure Step 1 Turn the Projector On Check the connection between the projector and the computer or AV equipment. (P49 - P51) For instructions on connecting the power cord, refer to “Plugging the Projector In” (P52). Press the POWER button. The [POWER ON] indicator initially flashes green, after which it remains lit.

  • Page 54: When The Language Selection Screen Appears

    Projection Procedure ■ When the Language Selection Screen Appears A screen appears when the projector is turned on for the first time. You can select a language to be used by the projector for displaying menus and messages in the window.

  • Page 55: Changing Notebook Computer Screen Output

    Projection Procedure Changing Notebook Computer Screen Output For projection from a notebook computer, the computer settings must be adjusted to switch display output. This operation is not required for a desktop computer. ■ Turning on External Monitor Output You can turn on the external monitor output via keyboard operation. To turn on the external monitor output with most computers, press the function key ([F1] to [F12]) which is marked with the external monitor icon while holding down the [Fn] key.

  • Page 56: Step 2 Select An Input Signal

    Projection Procedure Step 2 Select an Input Signal Select the input signal in the [Input] menu when you want to project a digital PC or AV equipment signal, or to switch between inputs when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed the input signal since the last projection.

  • Page 57: Step 3 Adjust The Image

    Projection Procedure Step 3 Adjust the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution of the computer to the resolution closest to the output signal resolution of the projector. (P180) Maximum resolution 1920 X 1200 dots...
  • Page 58 Projection Procedure ■ Windows Vista Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust screen resolution] in the [Control Panel Home]. Select the resolution closest to the maximum output signal resolution of the projector from the [Resolution] list. Click the [OK] button.
  • Page 59 Projection Procedure Focusing, Resizing, or Moving the Image ■ Adjusting Image Focus To adjust the focus, press the FOCUS button on the remote control or the LENS button on the projector. For the projection distances of the lens unit, refer to “Relationship Between Image Size and Projecting Distance”...

  • Page 60: Adjusting Image Size

    Projection Procedure ■ Adjusting Image Size The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom function.

  • Page 61: Adjusting The Image Position

    Projection Procedure ■ Adjusting the Image Position To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the remote control or the LENS button on the projector. It can change the projected screen to the most suitable position by moving the position of the lens up/ down/left/right.

  • Page 62: Resetting The Position

    Projection Procedure ■ Resetting the Position The lens position after movement with the lens shift function is not returned when the power is turned off. To return it to its original position, perform reset. During screen position adjustment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift reset] window.

  • Page 63: Step 4 Select An Aspect Ratio (Screen Aspect) Matching The Screen

    Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size.
  • Page 64 Projection Procedure Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK button. Remote control Projector Use the [ ] / [ ] buttons to select the desired contents. Remote control Projector 16:10 Select this when you use a screen with an aspect ratio of 16:10.

  • Page 65: Resetting The Image Shift

    Projection Procedure 4:3 D. image shift Select this when you use a screen with an aspect ratio of 4:3. Keystone correction cannot be performed in this mode. However, it is possible to move the image left / right when projecting level. For details about how to move the image, refer to “Digital image shift”...

  • Page 66: Selecting An Aspect Ratio

    Projection Procedure ■ True size The image is projected with the original resolution of the input signal. Screens of computers with a lower display resolution than the projector are displayed smaller but clearer than in other aspect ratios. There may be some cases when this cannot be selected, depending on the input signal and/or resolution.

  • Page 67: Step 5 Adjusting Keystone Distortion

    Projection Procedure Step 5 Adjusting Keystone Distortion To correct keystone distortion, press the D.SHIFT/KEYSTONE button. Two types of correction are available: horizontal/vertical correction and corner correction. Use horizontal/vertical keystone correction to adjust image width or height distortion separately, and use corner correction to adjust the position of each corner of the image.
  • Page 68 Projection Procedure Press the pointer buttons to adjust the dimensions. Remote control To correct bottom distortion, To correct top distortion, press the [ ] button. press the [ ] button. Screen To correct distortion on the left, To correct distortion on the press the [ ] button.

  • Page 69: Resetting The Keystone Adjustment

    Projection Procedure Press the pointer button of the corner for correction, and then press the OK button. Remote control Press the pointer buttons to adjust the corner. Remote control When you have finished correcting, press the OK button. Corner adjustment settings will be cleared if you subsequently use [Zoom] (P97) in the [Install settings] menu.

  • Page 70: Step 6 Select The Image Quality (Image Mode)

    Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P88) Image Modes Available image modes vary depending on the selected input signal and whether [HDMI image input] (P112) and [HDBaseT image input] (P112) is set to [Auto] or...

  • Page 71: Step 7 Turn The Projector Off

    Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control You can also select any image mode from the [Image mode] menu.

  • Page 72: Convenient Features

    Convenient Features This section describes features convenient during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience’s attention away from the screen. Press the BLANK button to black out the image. Remote control Press the BLANK button again to show the image.
  • Page 73 Convenient Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see “Install settings” (P95) or “Displayed Test Patterns”...

  • Page 74: Adjusting The Volume

    Convenient Features Adjusting the Volume Useful when: • You want to adjust the volume level of the projector or external speakers. Press the VOL button. The following screen appears. Remote control • You can also adjust the volume level with the [ ] / [ ] buttons of the projector.

  • Page 75: Zooming Part Of An Image

    Convenient Features Zooming Part of an Image Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the + D.ZOOM button Remote control to enlarge a part of the image.

  • Page 77: Advanced Guide

    Safety Instructions Before Use Advanced Guide Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting...

  • Page 78: Using Menus

    Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P81) You can set the type of signal or the method of projection of the images input.

  • Page 79: Basic Menu Operations

    Using Menus Basic Menu Operations Press the MENU button to display the menu window. Remote control Projector Press the [ ] / [ ] buttons to select a tab. Remote control Projector • If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top.
  • Page 80 Using Menus Adjusting with the [ ] / [ ] buttons Example: Contrast (P89) 1. Select [Contrast]. 2. Use the [ ] / [ ] buttons to adjust the setting. Selecting from a different screen (1) Example: Menu position (P104) 1.

  • Page 81: Menu Description

    Menu Description Input settings This section describes settings for aspect ratio, resolution, and projection from a USB flash drive. (When the input signal is Analog PC-1) Menu Function Details Aspect Select an image aspect ratio. Automatically adjusts display position misalignment Auto PC and screen flickering.
  • Page 82 Menu Description Aspect [Aspect] > [Input settings] > Select a projection aspect ratio for images. Option Function An image is projected at the aspect ratio of the input signal. Auto Suitable for most projection. 16:10 The image is projected using an input signal aspect ratio of 16:10. 16:9 The image is projected using an input signal aspect ratio of 16:9.

  • Page 83: Input Signal Settings

    Menu Description Input signal settings [Input signal settings] > [Input settings] > Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as needed. Submenu Function Adjust the total number of horizontal dots. Adjust it when stripes Total dots are displayed on the screen.

  • Page 84: Split Screen

    Menu Description Split screen [Split screen] > [Input settings] > Two input images from devices connected to the projector can be projected side by side. Option Function Exit split-screen mode. Activate split-screen mode. Submenu Function Split screen Switch between normal and split-screen projection. Select the image to control.

  • Page 85: Color Space

    Menu Description • You can select this only when the type of signal sent from AV equipment is RGB. • In [Auto] mode, the signal level is selected automatically. (Some AV equipment and HDBaseT transmitters may not support this.) • If your AV equipment HDMI output can be set to [Normal] or [Expanded], we recommend [Expanded].
  • Page 86 Menu Description Progressive [Progressive] > [Input settings] > Performs progressive processing optimized for still images in cinematic content or moving images in videos. Option Function Does not perform progressive processing. Suitable for still images or typical moving images. Performs progressive Film/auto processing for video or cinematic content.

  • Page 87: Image Adjustment

    Menu Description Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. (When the input signal is Analog PC-1) Menu Function Details Image mode * Select overall image quality to suit the projected image. Create profile Save desired image quality settings as profiles.

  • Page 88: Image Mode

    Menu Description Image mode [Image mode] > [Image adjustment] > Select the overall image quality for projected images. Can also be selected by pressing the IMAGE button on the remote control. (P70) Function Option Room Types of Images Good For Brightness Computer screens, or Whites and natural...
  • Page 89 Menu Description Brightness [Brightness] > [Image adjustment] > Adjust image brightness. Contrast [Contrast] > [Image adjustment] > Sharpen or soften image contrast. Sharpness [Sharpness] > [Image adjustment] > Adjust image sharpness. Gamma [Gamma] > [Image adjustment] > Correct image areas that are too dark or too bright to see clearly. Can also be selected by pressing the GAMMA button on the remote control.

  • Page 90: Ambient Light

    Menu Description Advanced adjustment [Advanced adjustment] > [Image adjustment] > Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. Option Function Projects an image with no correction. For ambient light from conventional light bulbs Tungsten or fluorescent light of this color.

  • Page 91: Mpeg Noise Reduction

    Menu Description MPEG noise reduction Reduce MPEG image noise*. * Block noise resembles pixelation and may affect either on JPEG images or in MPEG video. Option Function Disables MPEG noise reduction. Weak Middle Specify one of three levels of intensity of the MPEG noise reduction. Strong This setting is not displayed for LAN or USB input.

  • Page 92: Axis Color Adjust

    Menu Description 6-axis color adjust Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images. Option Function Disables 6-axis color adjustment. Adjust Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or Brightness], and use the [ ] / [ ] buttons for adjustment.

  • Page 93: Lamp Control

    Menu Description Lamp control Dims the lamp automatically when the input signal is completely black. Option Function No lamp control. Lamp control. Dims the lamp in response to fully black input signals. Normal brightness is restored once the input signal changes from fully black. •...
  • Page 94 Menu Description Reset [Reset] > [Image adjustment] > Restore the current image quality settings to the factory defaults. Option Function Resets the image adjustment settings. Cancel Cancels resetting of the image adjustment settings. • Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile.

  • Page 95: Install Settings

    Menu Description Install settings Adjust projection to suit the screen or the type of images, or how the projector is installed. (When the input signal is Analog PC-1) Menu Function Details Operation of installation related functions can be Positional lock prohibited.
  • Page 96 The projected image is inverted in the vertical direction. • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment.
  • Page 97 Menu Description • Changing the screen aspect will reset any keystone or digital image shift setting. • [Auto] may be automatically selected for the aspect depending on the screen aspect setting. Zoom [Zoom] > [Install settings] > When the Short Fixed Lens is attached and if the projected image does not fit on the screen, you can display the image by electronically reducing its size.
  • Page 98 Menu Description Digital image shift [Digital image shift] > [Install settings] > Moves the position of the projected image. For 16:9 D. Image Shift, move images vertically using the [ ] / [ ] buttons, and for 4:3 D. Image Shift, move images horizontally using the [ ] / [ ] buttons. This cannot be selected when the screen aspect is 16:9, 16:10 or 4:3.

  • Page 99: Fan Mode

    Menu Description Fan mode Switch the fan mode to suit installation at low or high altitudes (above 2,300 m (7,545.8')). Option Function Normal Setting for altitudes lower than 2,300 m (7,545.8'). High altitude Setting for altitudes of 2,300 m (7,545.8') or higher. Incorrect settings may shorten the useful life of the lamp or other parts.
  • Page 100 Menu Description Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see “Projecting from Multiple Projectors at Once (Edge Blending)” (P154). [Off] Disable blending.
  • Page 101 Menu Description Submenu Function Left, Right, Select the direction of the blending area to adjust. Top, Bottom Width Specify the width between the start and end markers. Start Moves the position of the start marker. position • Large blending areas may cover input signal dialog boxes and Side other interface elements.
  • Page 102 Menu Description Submenu Function Because black is lighter in the blending area than in other areas, you can adjust the black level outside the blending area to make this difference in brightness less noticeable. Position of end marker (hidden) Left image Area A: Black level cannot be adjusted.
  • Page 103 Menu Description Submenu Function Correct image distortion by aligning corners of the blending area with the image from the reference projector. For multi-projection alignment, align the corners with the projector blending area (already adjusted) that forms the basis. Points to adjust Blending area Corner adjustment Select the direction of the blending area to adjust.

  • Page 104: Screen Color

    Menu Description • [Load position] is not available unless you perform [Save position] once. • The original lens position varies depending on the type of lens used. • When saved lens positions are restored, images may be projected in a slightly different position than the saved position.

  • Page 105: Menu Display Time

    Menu Description The guide screen is shown at the following cases. • No input signal is detected. (P54) • An invalid button is pressed in [BLANK], [FREEZE], or [D.ZOOM] mode. (P34) • When positional lock (P96) is set to [On] and buttons locked by this feature are pressed.

  • Page 106: Test Pattern

    Menu Description Lamp warning display Specify whether to show a lamp replacement message after the lamp has been used for a specified period. Option Function The prepare lamp message and the lamp warning are not displayed. The prepare lamp message and the lamp warning are displayed. •...

  • Page 107: System Settings

    Menu Description System settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. (When the input signal is Analog PC-1) Menu Function Details Customize user screens shown at startup, when no User screen settings P108 signal is detected, and in other situations.

  • Page 108: Logo Capture

    Menu Description User screen settings [User screen settings] > [System settings] > Capture a logo and specify logo display settings. Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Option Function Display the image for logo registration.

  • Page 109: Key Lock

    Select a logo to project after startup until input signals can be projected. Option Function Skip A black screen is projected. Canon logo Displays the Canon logo that was registered in advance at the factory. User logo The user logo is projected. Interface settings [Interface settings] > [System settings] >...
  • Page 110 Menu Description To Unlock Key Lock Function Turn off the projector and unplug the power plug. Hold down the OK button on the main unit and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked.

  • Page 111: Communication Settings

    Menu Description HDBaseT Enable or disable HDBaseT. Refer to the following sections for details on HDBaseT connections. For video/audio details, see “Connection Procedure” (P50, P51). For network details, see “Connection Methods” (P120). Option Function Disable HDBaseT. Enable HDBaseT. The HDBaseT input signal value received is indicated by a white line. Image signal quality Indicated by the green portion.

  • Page 112: Power Management Mode

    Menu Description HDMI image input Set the type of equipment which is connected to the HDMI port. Note that to some extent, the [HDMI image input] setting determines which image modes are available. (P70) Option Function Select when AV equipment will be connected. Image processing, menu Auto displays, and other elements are adjusted for video equipment.

  • Page 113: Direct Power On

    Menu Description Power management duration [Power management duration] > [System settings] > Specify how long before the lamp is turned off or the projector enters standby, depending on the [Power management mode] setting. Option Function After 30 seconds without an input signal when the projector is idle, 5 min.
  • Page 114 Menu Description Motion blur reduction [Motion blur reduction] > [System settings] > Motion blur is blurring that occurs during video playback. Motion blur reduction can make this blurring less noticeable. Option Function Motion blur reduction is not performed. Motion blur reduction is performed. •...

  • Page 115: Other Settings

    Menu Description Other settings [Other settings] > [System settings] > Lock operation with a password, set a password, reset counters for lamp or air filter replacement, and access other settings and information. Password settings Disables the projector unless the correct password is entered. Option Function The projector can be used even if no password is entered.
  • Page 116 Menu Description Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the [ ] / [ ] / [ ] / [ ] buttons. The 4-digit password is entered from the left to right digits. When the final digit is entered, the password is automatically registered.
  • Page 117 P163 - P164. Firmware Update the projector firmware as follows. Download firmware updates from the Canon website and store them at the root directory on a USB flash drive. Check the version indicated before updating the firmware. • Firmware versions shown here are for illustration only and differ from actual versions.

  • Page 118: Factory Defaults

    Menu Description Factory defaults You can reset the menu item settings and restore the system settings to the factory defaults. Option Function Settings are reset to default. Cancel Settings are not reset to default. Main factory defaults Input settings Install settings Submenu Default Value Submenu...
  • Page 119 Direct power on Logo position Center Beep No signal screen Blue Motion blur reduction Screen when blank Black Other settings Projector on Canon logo Password settings Interface settings [Fn] button settings Disable Key repeat Gamma restore Key lock Remote control Independent channel...

  • Page 120: Network Settings

    Menu Description Network settings Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary.
  • Page 121 Menu Description • When you connect the computer to the network for the first time, it is also necessary to perform settings on the computer. In this case, consult the network administrator regarding the necessary settings. In a network environment where a DHCP server is operating, choose [On] on the projector [DHCP] screen to enable the DHCP function and connect it.

  • Page 122: Completing Projector Settings

    Menu Description Completing Projector Settings Settings described in this section apply to the network connections, setting a network password, and other aspects of networked projection. (When the input signal is Analog PC-1) Menu Function Details Network settings lock Lock network settings to prevent changes. P123 Network password Activate or deactivate password protection for network...
  • Page 123 Menu Description Network settings lock [Network settings lock] > [Network Settings] > You can lock/unlock the network settings so that they cannot be changed. Option Function Cancels the lock and allows other network settings to be changed. The Unlock password must be entered in order to cancel the lock. Use the [ ] / [ ] / [ ] / [ ] buttons to enter the 4-digit password.

  • Page 124: Network Function

    Menu Description Network standby settings [Network standby settings] > [Network settings] > Specify the network function operating status in standby mode as follows. Option Function All network functions are available even in standby mode, Normal including the web screen, control over the network, and PJLink. All network functions are available even in standby mode.

  • Page 125: Detailed Settings

    Menu Description Detailed settings [Detailed settings] > [Network settings] > Display and manually change the IP address, gateway address, and other settings. Available only when the network function is [On]. Menu Function IP address IP address of the projector. Gateway address Gateway address of the projector.
  • Page 126 Menu Description Menu Function The following network settings are initialized. Settings configured from the projector menu (P131) • Network password setting (P123) • Register network password (P123) • Network function (P124) • Detailed settings(P125) • PJLink (P127) • AMX Device Discovery (P128) Network setting •...
  • Page 127 Menu Description PJLink [PJLink] > [Network settings] > You can enable or disable the PJLink network function of the projector. When this function is enabled, control is possible over a network using PJLink commands. Option Function Disables the PJLink function. Enables the PJLink function.

  • Page 128: Amx Device Discovery

    Menu Description AMX Device Discovery [AMX Device Discovery] > [Network settings] > In a network environment, AMX Device Discovery can be used to enable other equipment to discover the projector. For networks without AMX Device Discovery, select [Off]. Option Function Disables AMX Device Discovery.

  • Page 129: Completing Computer Settings

    Menu Description Completing Computer Settings Specifying an IP Address Instructions for setting a computer’s IP address are as follows for each operating system. ■ Windows 8 / 8.1 Right-click on the start screen background and click [All Apps] in the lower right.
  • Page 130 Menu Description ■ Windows 7 From the PC [Start] menu, select [Control Panel]. Click on [Network and Internet], then click on [View network status and tasks]. From the menu on the left side of the window, click on [Change adapter settings].

  • Page 131: Resetting The Ip Address Setting Of The Computer

    Menu Description ■ Mac OS X Open the Apple Menu and select [System Preferences]. In the System Preferences window, click [Network] to display the Network window. Select [Built-in Ethernet] and click the [TCP/IP] tab. Make a note of the original network settings (IP address, subnet mask, router, DNS server, etc.).
  • Page 132 Menu Description The following information is displayed. Network Multiple Projection For downloading the Networked Multi-Projection Download (NMPJ) program.* Projector control Displays the projector control screen. Settings Shows the settings screen. Projector name The name of the projector on the network Comment Relevant notes, such as where the projector is installed MAC address...

  • Page 133: Network Setting

    Menu Description Enter the user name and password on the password input window, then click [OK]. The factory default user name is “root” and the password is “system”. The settings screen is displayed. Complete the network settings on this screen. To control the projector from the computer, click [Projector control].
  • Page 134 Menu Description Enter setting details in the fields shown (1), and then click [OK] (2). A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the projector. Selecting [Network] or [Password] in the menu will cause this message to be displayed: “Save completed.
  • Page 135 Menu Description Setting a Password [Password] From [Password] in the settings screen, you can set a user name and password for web screen login. For the setting procedure, refer to “Network Setting” (P133). Item Explanation Factory default setting User name When logging into the web screen, root enter the user name in 1-byte...
  • Page 136 Menu Description Setting Basic Information [Network] From [Network] in the settings screen, you can log into the web screen and set basic network information. For the setting procedure, refer to “Network Setting” (P133). Item Explanation Factory default setting MAC address Shows the projector’s MAC address.
  • Page 137 Menu Description Specifying Networked Multi-Projection Settings [NMPJ Password] From [NMPJ Password] in the settings screen, you can specify the items needed for NMPJ authentication. For the setting procedure, refer to “Network Setting” (P133). Item Explanation Factory default setting Password Enter the password required for a <Blank>...
  • Page 138 (1 - 63 characters). From: Enter the sender address for error mails Projector@canon.co.jp in 1-byte alphanumeric characters and symbols (1 - 63 characters). SMTP server IP address Enter the SMTP server IP address in 1- 0.0.0.0...
  • Page 139 Menu Description Mail Authentication Settings [Mail auth] From [Mail auth] in the settings screen, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to “Network Setting” (P133). Item Explanation Factory default setting Mail authentication...
  • Page 140 The sender address which was set from [Mail] in the settings screen (P138) is displayed. Subject: The predetermined mail title “Canon Projector test” is displayed. SNMP Settings [SNMP] From [SNMP] in the settings screen, you can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol).
  • Page 141 For the setting procedure, refer to “Network Setting” (P133). Item Explanation Factory default setting Projector name Enter the projector name in 1-byte Canon Projector001 alphanumeric characters and symbols (1 - 63 characters). Comment Enter any relevant notes, such as where <Blank>...
  • Page 142 Menu Description Setting PJLink [PJLink] From [PJLink] in the settings screen, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to “Network Setting” (P133). For information about PJLink, refer to “What is PJLink?”...

  • Page 143: Setting Errors

    Menu Description Setting Errors When a setting-related error occurs, the error name is displayed on the screen, and a “!” mark is displayed next to the input field which caused the error. The error meanings are as shown below. Error Meaning Input error A setting outside the valid range was set on the...
  • Page 144 Menu Description Resetting Network Settings to the Default Settings Perform steps 1 - 3 on “Displaying the Network Configuration Screen” (P131) to display the settings screen. Click [Initialize]. A confirmation window appears. Click [OK].

  • Page 145: Error List

    Menu Description ■ Error Notification Mails The messages shown in the following error list are sent when an error occurs in the projector. Error list Errors related to Error name Temperature abnormality temperature Text The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one.

  • Page 146: Controlling The Projector From A Computer

    Menu Description Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via the network. Turn on the computer and projector. Launch a web browser, enter “http://(projector IP address)” in the address bar, and press the Enter key.
  • Page 147 Menu Description Item Explanation Split screen Select the setting for split-screen mode and click [Apply] to switch to split-screen projection. Split screen Select the control rights setting for split-screen mode and click [Apply] control to switch the side currently under control. Information The control results and control error information are displayed at the top of the screen.

  • Page 148: Checking Projector Information

    Menu Description Checking Projector Information You can check information about the signal types of the images projected and other information. Menu Function Model name Shows the model name. Details of the input signal currently selected Input signal Information such as the type, resolution, frequency, and color format of the signal is displayed.

  • Page 149: Advanced Projection

    Advanced Projection Projecting Images on a USB Flash Drive JPEG images stored on a USB flash drive connected to the projector can be projected as follows. Individual images can be selected for projection, or you can project all images in a slideshow. JPEG images up to 10912×8640 can be projected.
  • Page 150 Advanced Projection Select a file to project. Motion blur reduction is not available when projecting JPEG files on a USB flash drive. (P114) Switch to other images as needed. To switch to the previous image, press the [ ] button. To switch to the next image, press the [ ] button.

  • Page 151: Description Of Usb File Browser

    Advanced Projection Description of USB File Browser If a USB flash memory is connected to the projector, the USB file browser appears. In the USB file browser, you can select the image file to be projected by operating the file list in the USB memory device. Thumbnail view List view (1) List title...

  • Page 152: Selecting An Image For Projection

    Advanced Projection Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting on the screen. ■ Selecting a Drive This step may not be necessary when a USB flash drive is connected directly to the projector’s USB port.

  • Page 153: Running A Slideshow Of Data Saved In A Usb Flash Memory

    Advanced Projection Running a Slideshow of Data Saved in a USB Flash Memory Multiple images on a USB flash drive can be projected consecutively, with each shown for a specific interval. ■ Creating an Image File Folder During slideshows, files in a folder are projected in alphabetical order by file name. Keep this in mind when preparing the files in a folder on the USB flash drive.

  • Page 154: Projecting From Multiple Projectors At Once (Edge Blending)

    Advanced Projection Press the INPUT button, and then select the input signal for the side with control rights. Side currently under control (input signal can be switched) Orange display Current input signal of side with control rights Green display Current input signal of side without control rights White display •...
  • Page 155 Advanced Projection Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. By default, the green and red markers are displayed in the same position, so only the red marker is visible.

  • Page 156: Black Level Adjustment

    Advanced Projection ■ Black Level Adjustment In overlapping projection, dark colors are projected with less intensity than other colors in the overlapping area. You can make this overlapping area less distracting by adjusting the black level of non-overlapping image areas. Left image Right image Area where dark colors look lighter...
  • Page 157 Advanced Projection ■ Smoother Overlapping Areas The black level along the right edge of area D (along the blending area) may be more noticeable than that of surrounding areas. By adjusting the black level of area B, you can make the transition smoother. To compensate, adjust each area as follows.
  • Page 158 Advanced Projection Readjust the black level of area B, as needed. • To reduce distracting colors and colors that are out of alignment in areas where the images overlap, perform [Color blending adjustment] targeting the main tone in the envisaged projected image.
  • Page 159 Advanced Projection As you watch the projected images, fine-tune markers of the projector you are adjusting so that they overlap the reference projector markers as much as possible. Image from reference Image from the projector adjusted projector Adjust positions of each of the four corners in the overlapping area.

  • Page 161: Other Information

    Safety Instructions Before Use Other Information Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting...

  • Page 162: Maintenance

    Request Internal Cleaning Regularly Dust that accumulates over long periods without cleaning may eventually cause fire or electric shock. Once a year, request internal cleaning from the Canon Customer Support Center. (Note that a fee is charged.) Cleaning before damp, rainy seasons...

  • Page 163: Cleaning The Air Filter

    Maintenance Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raise the internal temperature of the projector.

  • Page 164: Replacing The Air Filter

    • Handle the air filter carefully. If damaged, the air filter will not work properly. • When the lamp is replaced, it is recommended that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part no.: RS-FL01...

  • Page 165: Replacing The Lamp

    Maintenance Replacing the Lamp When the usage time of the lamp exceeds a certain amount of time, the following message (two types) is displayed for 10 seconds every time the projector is turned 2,700 hours to less than 3,000 hours Prepare a new lamp when this screen is displayed.
  • Page 166 Maintenance • Lamps are more likely to rupture once the lamp replacement message has been displayed. Replace the lamp with a new one as soon as possible. • Lamps should be replaced about every 3,000 hours. Note that there is no guarantee about how long lamps will last. •...

  • Page 167: Replacement Lamp

    Doing so may cause deterioration to the projector’s performance. • Handle lamps with care. Impact or abrasion may cause lamps to rupture while they are in use. If a lamp ruptures, contact the Canon Customer Support Center and follow the instructions in “Precautions when replacing lamps that stop working”...

  • Page 168: Lamp Replacement Procedure

    Maintenance Lamp Replacement Procedure Turn off the projector power and remove the power plug. Loosen one screw and open the lamp cover in the direction of the arrow. The lamp cover screw is attached to the lamp cover and designed to prevent it from falling off.
  • Page 169 Select [Reset] > [Yes] to reset the lamp counter. • It is recommended that you also replace the air filter when you replace the lamp. (P162) • Contact the Canon Customer Support Center for further information. • Replacement air filter part no.: RS-FL01...

  • Page 170: Installing / Removing The Lens Unit

    • Do not attempt to install or remove the lens unit yourself. Be sure to request this service from a qualified technician or contact the Canon Customer Support Center. • When installing and removing the lens unit, be sure not to touch the surface of the lens with your hands or scratch it.
  • Page 171 Maintenance Loosen the cosmetic panel screw, then slide the cosmetic panel toward the rear to remove it. The cosmetic panel screw is attached to the cosmetic panel and designed to prevent it from falling off. In order to prevent damage, close the lamp cover and temporarily fasten the screw.
  • Page 172 Maintenance Then turn the projector back over and remove the sleeve. Referring to the following illustration, insert the lens connector of the lens unit into the front right side of the projector slowly until it contacts the end. At this time, pull out the lens cable shown in the illustration and fix it.
  • Page 173 Maintenance Insert the projector lens cable into the connector until a click sound is heard. Reinstall the sleeve, cosmetic panel, and lamp cover in their original positions. When the power is first turned on after the lens unit has been installed or replaced, lens shift initialization operation will be performed.

  • Page 174: Removing The Lens Unit

    Maintenance ■ Removing the Lens Unit Perform steps 1 to 5 of “Installing the Lens Unit” (P170 – P172) to remove the sleeve. Disconnect the lens cable from the lens connector. When pulling out (disconnecting) the lens cable, press the buttons on both sides of the lens cable connector while pulling out the cable.

  • Page 175: Product Specifications

    Product Specifications Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P63) and aspect (P65). Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size.
  • Page 176 Product Specifications ■ When projecting at the original aspect ratio on a 16:9 screen Original Aspect Screen aspect Aspect setting (P65) Screen image Ratio setting (P63) (16:10) 1920 x 1200 [Auto] 1440 x 900 1280 x 800 (16:9) [16:9] [16:9] 1920 x 1080 [16:9 [Auto]...
  • Page 177 Product Specifications ■ When projecting to fill a 16:10 screen Original Aspect Screen aspect Aspect setting (P65) Screen image Ratio setting (P63) (16:10) 1920 x 1200 [16:10] 1440 x 900 [Auto] 1280 x 800 (16:9) 1920 x 1080 [16:10] [16:10] 1280 x 720 (4:3) 1600 x 1200...
  • Page 178 Product Specifications ■ When projecting to fill a 4:3 screen Original Aspect Screen aspect Aspect setting (P65) Screen image Ratio setting (P63) (16:10) 1920 x 1200 [4:3] 1440 x 900 1280 x 800 (16:9) [4:3] 1920 x 1080 [4:3 [4:3] 1280 x 720 D.

  • Page 179: Displayed Test Patterns

    Product Specifications Displayed Test Patterns To access the test pattern menu, from the [Install settings] menu, select [Test pattern] > [On] (P106). While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch patterns.

  • Page 180: Supported Signal Types

    Product Specifications Supported Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with any one of these signal types, the projector’s Auto PC function selects the input signal type to project an image appropriately.
  • Page 181 Product Specifications Horizontal frequency Resolution (dots) Signal type Vertical frequency (Hz) (kHz) 27.000 24.000 1080PsF – 28.125 25.000 (1920 x 1080i) 33.750 30.000 1920 x 1200 D-WUXGA 74.038 59.950 HDMI/HDBaseT Connecting to a computer Horizontal frequency Resolution (dots) Signal type Vertical frequency (Hz) (kHz) 640 x 480...
  • Page 182 Product Specifications ■ Projector Model name WUX6010 Display system RGB liquid crystal system (LCOS) : 3 panels Color separation by dichroic mirror / polarizing beam splitter Optical system and color composition by prism Type Reflective liquid crystal panel (LCOS) : 3 panels Size / Aspect ratio 0.71'' X3 / 16:10...
  • Page 183 Product Specifications Model name WUX6010 DVI-I terminal Analog PC, Digital PC (29-pin DVI connector) HDMI terminal HDMI (deep color only) ANALOG PC / Analog PC, Component (mini D-sub 15-pin) COMPONENT terminal HDBaseT-compatible video/audio, 100BASE-T networking, HDBaseT terminal serial communication (RJ-45)
  • Page 184 Product Specifications ■ Remote Control Type RS-RC04 RS-RC05 (Option) DC 3.0V, using two AAA-size Power supply DC 3.0V, using two AA-size batteries batteries Operating range Approx. 8 m± 25° horizontal and vertical (to infrared remote receiver) 43 mm (W) x 23 mm (H) x 51 mm (W) x 28 mm (H) x Dimensions 135 mm (D) /...
  • Page 185 Product Specifications Name Short Fixed Lens Ultra Long Zoom Lens Model number RS-IL03WF RS-IL04UL External View Focal length 12.8 mm (0.5'') 53.6 - 105.6 mm (2.1 - 4.2'') F number 2.34 - 2.81 Width 97.4 mm (3.8'') 97.4 mm (3.8'') Height 106.5 mm (4.2'') 106.5 mm (4.2'')

  • Page 186: External View

    Product Specifications ■ External View WUX6010 430 mm (16.9'') 92 mm (3.6'') 380 mm (15.0'') 128 mm (5.0'') 234.5 mm (9.2'') 53 mm (2.1'') 212 mm (8.35'') Bolt holes (M4 x 6) for installation of ceiling attachment...

  • Page 187: Pin Assignment

    Product Specifications ■ ANALOG PC-2 / COMPONENT Terminal This terminal is used as a computer ANALOG PC input or COMPONENT input terminal. Use a D-sub computer cable. The terminal specifications for the ANALOG PC input and COMPONENT input are the same. Mini D-sub 15-pin Pin No.
  • Page 188 Product Specifications User commands Commands ASCII representation Binary representation Power on POWER=ON<CR> 50h 4Fh 57h 45h 52h 3Dh 4Fh 4Eh 0Dh Power supply 50h 4Fh 57h 45h 52h 3Dh 4Fh 46h 46h Power off POWER=OFF<CR> Power status 47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h GET=POWER<CR>...
  • Page 189 Product Specifications Commands ASCII representation Binary representation Brightness Brightness BRI=<value><CR> 42h 52h 49h 3Dh <numeric code> 0Dh value setting Brightness GET=BRI<CR> 47h 45h 54h 3Dh 42h 52h 49h 0Dh acquisition Sharpness 53h 48h 41h 52h 50h 3Dh <numeric Sharpness SHARP=<value><CR> value setting code>...

  • Page 190: Troubleshooting

    Contact the Canon Customer Support Center if the same warning occurs again. WARNING Faulty power Abnormal voltage is applied to some parts in the...

  • Page 191: Symptoms And Solutions

    Filter error The air filter is not installed. Check whether or not (only) flashes 3 the air filter is installed correctly. Contact the times Canon Customer Support Center if the same repeatedly. warning occurs again. WARNING Faulty lens The lens cable is not connected to the lens unit...

  • Page 192: You Cannot Project An Image From The Projector

    Troubleshooting ■ You Cannot Project an Image from the Projector Cause Countermeasure A cable is not connected Check whether the projector is connected to the correctly. computer or AV equipment correctly. (P49 - P51) 20 seconds have not When the projector is turned on, the opening window elapsed since the is displayed for approximately 20 seconds.

  • Page 193: There Is No Sound

    Troubleshooting Cause Countermeasure The image files are not Projection from USB flash drives requires JPEG compatible with USB File images with a resolution not exceeding 10912x8640, Browser. single-byte alphanumeric file names, and a FAT- formatted drive. The LAN cable (shielded When [LAN] or [HDBaseT] is selected in the [Input] twisted pair) is not menu, check whether the LAN cable (shielded...

  • Page 194: You Cannot Project An Image Appropriately

    Troubleshooting Cause Countermeasure The projector has been When the projector is moved from a location where moved to a place where the temperature is low to a location where the the temperature varies a temperature is high, condensation may form on the lot.
  • Page 195 Troubleshooting Cause Countermeasure The lamp has ruptured If the lamp has ruptured, follow the instructions in (or there is a lamp “Precautions when replacing lamps that stop malfunction). working” (P15). The operating Check whether the operating temperature is between environment is 0°C (32°F) and 40°C (104°F).

  • Page 196: You Cannot Operate The Remote Control

    Troubleshooting ■ You Cannot Operate the Remote Control Cause Countermeasure Batteries are not Check whether batteries are installed correctly. If installed properly or they batteries are installed correctly, replace them with have run out. new batteries. (P36) You are operating the Check whether you are operating the remote control remote control from the within the remote control operating range of the main...

  • Page 197: Index

    Index Numerics Dynamic gamma .......91 6-axis color adjust ......92 Edge blending ....26, 100, 154 Effect of ambient light......90 Adjusting keystone distortion .... 67 Adjusting the volume......74 Air filter..........164 FREEZE ..........72 Ambient light ........90 AMX Device Discovery ....128 Analog PC.........
  • Page 198 Index LED indicator ......30, 190 Lens - Position ........ 103 Screen aspect ......63, 175 Lens shift........... 47 Screen color ........104 Logo display........109 Selecting a language......54 Setting display status ......81 Sharpness .........89 Memory color correction ....91 Side control ........29 Menu ..........

  • Page 199: Option

    Option • Lamp • Air filter Part No.: RS-LP09 Part No.: RS-FL01 • Ceiling attachment • Remote control Part No.: RS-CL11 Part No.: RS-RC04 • Ceiling-mount pipe • Remote control (400 - 600 mm / 15.7 - 23.6 in) Part No.: RS-RC05 Part No.: RS-CL08* •...
  • Page 200 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom CANON EUROPA N.V.

Table of Contents