Table of Contents
Advertisement
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
L
Roll the roll paper slowly into the roll paper
holder.
M
Grip the handle on the adapter holder and slide to
the right until it is fully inserted to the holder
shaft.
Make sure that both ends of the roll paper are
seated securely to the adapters.
N
Raise the lock levers on the adapter holders to
lock them in place.
O
Press the Y button on the control panel.
The pressure roller is released.
Basic Operations
P
Insert the leading edge of the roll paper into the
paper feed slot, and then feed the roll paper by
hand until the leading edge comes out from
below the front cover.
If the leading edge of the roll paper does not
appear, use the u or d button to adjust the Paper
Suction.
Q
With both hands, pull the roll paper until the
leading edge of the paper is in the center of the
stand (the position of the label shown in the
illustration).
Make sure that the roll paper is free of slack and
the end is not folded.
R
Close the roll paper cover.
30
Advertisement
Table of Contents
