Table of Contents
Advertisement
3.
Push the fan into the chassis
until the four hooks lock
securely into the holes on the
rear panel.
4.
Re-connect the 3-pin fan cable
from the connector REAR_FAN1
on the motherboard.
2.10.2
2.10.2
HDD fan
HDD fan
2.10.2
2.10.2
2.10.2 HDD fan
HDD fan
HDD fan
To remove the HDD fan:
1.
Loosen the thumb screw that
secures the HDD fan cage to the
chassis.
2.
Hold the outer side of the fan
cage, then pull sideways to
release it from the chassis.
3.
Disconnect the 3-pin fan cable
from the fan connector on the
backplane before completely
detaching the fan cage from the
chassis.
Due to space constraints inside the chassis, some cables may interfere
with the removal of the fan cage. To easily remove the fan cage, try to
slightly push it inward (toward the motherboard) before pulling it out of
the chassis.
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
A S U S T W 5 1 0 - E 2
2 - 3 1
2 - 3 1
2 - 3 1
2 - 3 1
2 - 3 1
Advertisement
Table of Contents
