Table of Contents
Advertisement
5.4.5
5.4.5
5.4.5
PCIPnP
PCIPnP
PCIPnP
5.4.5
5.4.5
PCIPnP
PCIPnP
This menu shows the PCIPnP configuration settings. Select an item then
press <Enter> to display a pop-up menu with the configuration options.
Advanced
Resources Controlled By
IRQ Resources
PCI/VGA Pallete Snoop
** PCI Express relative items **
Maximum Payload Size
F1:Help
ESC: Exit
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Resources Controlled By [Auto]
Allows automatic or manual assignments of IRQ resources to boot devices
and Plug and Play devices. Configuration options: [Auto] [Manual]
When the item R e s o u r c e s C o n t r o l l e d B y
IRQ Resources is grayed out and not user-configurable. Refer to the
section "IRQ Resources" for information on how to enable this item.
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
PCI/VGA Pallet Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled]
corrects this problem. If you are using a standard VGA card, leave this field
to the default setting [Disabled]. Configuration options: [Disabled]
[Enabled]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Maximum Payload Size [4096]
Sets the maximum TLP payload size (in bytes) for PCI Express devices.
Configuration options: [128] [256] [512] [1024] [2048] [4096]
5 - 3 0
5 - 3 0
5 - 3 0
5 - 3 0
5 - 3 0
Phoenix-Award BIOS CMOS Setup Utility
PCIPnP
↑↓
↑↓
↑↓
↑↓ : Select Item
↑↓
→←
→←: Select Menu
→←
→←
→←
Enter: Select Sub-menu
R e s o u r c e s C o n t r o l l e d B y
R e s o u r c e s C o n t r o l l e d B y is set to [Auto], the item
R e s o u r c e s C o n t r o l l e d B y
R e s o u r c e s C o n t r o l l e d B y
[Auto]
[Disabled]
[4096]
-/+: Change Value
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
Select Menu
Item Specific Help
BIOS can automatically
configure all the boot
and Plug and Play
compatible devices. If
you choose Auto, you
cannot select IRQ DMA
and memory base address
fields, since BIOS
automatically assigns
them.
F5: Setup Defaults
F10: Save and Exit
Advertisement
Table of Contents
