Table of Contents
Advertisement
2.9.4 Power supply modules
The AP1710-S5 has two power supply modules. These hot swap power
modules can be removed or installed while the server is powered ON. One
power module is enough to power the server. When two power supply
modules are installed, the task of providing power to the server is shared.
To remove the redundant power supply module:
1. Remove the power module
screw.
2. Press down the rubber lever
3. Pull the power module handle
from the chassis.
Refer to the Appendix for the redundant power module specification.
ASUS AP1710-S5 user guide
Redundant Power Housing
2
500W Redundant
Power Module
Screw
1
3
Lever
2-29
Advertisement
Table of Contents
