Table of Contents
Advertisement
2.6
Hard disk drives
The AP1710-S5 comes with six externally accessible drive bays. In each
drive bay is a removable tray for mounting an SCA SCSI hard disk drive.
2.6.1 Installing a hard disk drive
Follow these steps to install a SCSI hard disk drive.
1. Open the front panel door.
2. Release the drive bay by lifting
the spring lock upwards, then pull
the tray lever outwards.
3. The tray will slightly eject after
the tray lever is pulled down. Pull
the hard disk drive tray out from
the chassis.
4. Place an SCA SCSI hard drive
into the drive tray. Secure the
drive with four (4) round head
screws.
2-16
Spring lock
Tray lever
Chapter 2: Hardware setup
Advertisement
Table of Contents
