2.9
Removable components
You may need to remove previously installed components when installing
or removing system devices. This section describes how to remove the
following components:
1. Chassis fan
2. HDD blower
3. Floppy disk drive
2.9.1 Chassis fan
To remove the 12-cm chassis fan:
1. Disconnect the 3-pin fan cable
from the connector on the
motherboard.
2. Use a flat screwdriver to push
the pin locks on the four corners
of the fan from the inside of the
chassis.
Pin lock (tail-end)
3. Pull out the pin locks from the
rear panel.
4. Remove the chassis fan.
ASUS AP1710-S5 user guide
4. Power supply modules
5. Power supply case
6. Roller wheels
2-25