hit counter script

Installing The Cpu - Asus Xeon Tower/5U Rackmount Server AP1710-S5 User Manual

Intel xeon tower/5u rackmount server 533mhz front side bus support
Table of Contents

Advertisement

2.3.1 Installing the CPU

The motherboard supports either one or two CPUs. If you are installing
only one CPU, you MUST install it in CPU socket 1.
Follow these steps to install a CPU.
1. Locate the 604-pin ZIF sockets
on the motherboard. Unlock the
socket by pressing the lever
sideways, then lift it up to at least
115° angle.
Make sure that the socket lever is lifted up to at least 115° angle,
otherwise the CPU does not fit in completely.
2. Position the CPU above the
socket as shown.
3. Carefully insert the CPU into the
socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to prevent bending the pins and damaging the CPU!
4. When the CPU is in place, press
it firmly on the socket while you
push down the socket lever to
secure the CPU. The lever clicks
on the side tab to indicate that it
is locked.
ASUS AP1710-S5 user guide
Marked Corner
2-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap1710-s5

Table of Contents

Save PDF