Table of Contents
Advertisement
2.5 System memory
2.5.1 Overview
The motherboard comes with two Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 2GB
system memory using 184-pin unbuffered non-ECC PC2100/1600 DIMMs.
P4S333-VM 184-Pin DDR DIMM Sockets
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
The DDR SDRAM technology evolved from the mainstream PC66, PC100,
PC133 memory known as Single Data Rate (SDR) SDRAM. DDR memory
however, has the ability to perform two data operations in one clock cycle,
thus providing twice the throughput of SDR memory.
DDR Data Transfer Rate
333MHz
266MHz
200MHz
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
2-10
P4S333-VM
®
104 Pins
80 Pins
DDR Base Frequency
166MHz
133MHz
100MHz
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
