Brother DCP-130C User Manual page 33
Hide thumbs
Also See for DCP-130C:
- User manual ,
- Service manual (383 pages) ,
- Software user's manual (155 pages)
Table of Contents
Advertisement
Error Message
Cause
The machine is out of paper or
No Paper Fed
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The machine's memory is full.
Out of Memory
Paper is jammed in the machine.
Paper Jam
The machine has a mechanical
Print Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
The machine has a mechanical
Scan Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
A non-PictBridge compatible or
Wrong USB
broken device has been connected
device
to the PictBridge port.
Troubleshooting and Routine Maintenance
Action
Do one of the following:
Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
Remove the paper and load it again and then
press Mono Start or Colour Start.
See Printer jam or paper jam on page 30.
Copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows
in the Software User's
Guide on the CD-ROM.)
See Printer jam or paper jam on page 30.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, disconnect the machine from the
power source for several minutes then
reconnect it.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, disconnect the machine from the
power source for several minutes then
reconnect it.
Unplug the device from the PictBridge port, then
press On/Off to turn the machine off and then on
again.
29
Advertisement
Table of Contents
