Brother DCP-130C User Manual page 31

Hide thumbs Also See for DCP-130C:

Table of Contents

Software Difficulties

Difficulty

Cannot install software or print

'Device Busy'

PhotoCapture Center™ Difficulties

Difficulty

Removable Disk does not work

properly.

Cannot access Removable Disk

from Desktop icon.

Suggestions

Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair

and reinstall the software.

Make sure the machine is not showing an error message on the LCD.

Suggestions

Have you installed the Windows

1) Unplug the USB cable.

2) Install the Windows

the installation the PC will be automatically restarted.

3) Wait about 1 minute after you restart the PC, and then connect the USB

cable.

Take out the media card and put it back in again.

If you have tried 'Eject' from within Windows

you continue.

If an error message appears when you try to eject the media card, it means

the card is being accessed. Wait a while and then try again.

If all of the above do not work, turn off your PC and machine, and then turn

them on again. (You will have to unplug the power cord of the machine to turn

it off.)

Make sure you have put the media card into the media slot.

Troubleshooting and Routine Maintenance

2000 update? If not, do the following:

2000 update, and see the Quick Setup Guide. After

, take out the media card before

Table of Contents